We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to detect when lightningd hasn't seen our latest
disconnect/reconnect; in particular, we would hit the following pattern:
1. lightningd says to connect a subd.
2. connectd disconnects and reconnects.
3. connectd reads message, connects subd.
4. lightningd reads disconnect and reconnect, sends msg to connect to subd again.
5. connectd asserts because subd is alreacy connected.
This way connectd can tell if lightningd is talking about the previous
connection, and ignoere it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch:
1. connectd says it's connected (peer_connected)
2. we tell connectd we want to talk about each channel (peer_make_active)
3. connectd gives us an fd for each channel, and we connect it to a subd (peer_active)
4. OR, connectd says it sent something about a channel we didn't tell it about, with an fd (peer_active)
Now:
1. connectd says it's connected (peer_connected)
2. we start all appropriate subds and tell connectd to what channels/fds (peer_connect_subd).
3. if connectd says it sent something about a channel we didn't tell it about, we either tell
it to hang up (peer_final_msg), or connect a new opening daemon (peer_connect_subd).
This is the minimal-size patch, which is why we create socket pairs in
so many places to use the existing functions. Many cleanups are
possible, since the new flow is so simple.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's directly a product of "does it have a current owner subdaemon"
and "does that subdaemon talk to peers", so create a helper function
which just evaluates that instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we wouldn't notify when a channel moves into state
"CHANNELD_AWAITING_LOCKIN", as this is the original state (so there's
no movement btw states). This meant that it's impossible to track when a
channel's commitment txs have been exchanged and we're waiting for
onchain confirmation.
It's useful to have notice of this initialization though, all in one
place so that the `channel_state_changed` notification can successfully
track the entire lifecycle of a channel, from inception to close.
Note that for v2 "dual-funded" channels, we already notify at the same place, at
"DUALOPEND_AWAITING_LOCKIN" (the initial state for a dualopend channel
is "DUALOPEND_OPEN_INIT" -- this is the only state we don't get notified
at now...)
Changelog-Added: Plugins: `channel_state_changed` now triggers for a v1 channel's initial "CHANNELD_AWAITING_LOCKIN" state transition (from prior state "unknown")
`alias_local` is generated locally and sent to the peer so it knows
what we're calling the channel, while `alias_remote` is received by
the peer so we know what to include in routehints when generating
invoices.
This is the counterpart of the `mindepth` parameter in `fundchannel`
and friends. Allows dynamic lookups of `node_id` and selectively
opting into `option_zeroconf` being used.
Changelog-Added: plugin: The `openchannel` hook may return a `mindepth` indicating how many confirmations are required.
This will eventually enable us to specify 0 for zeroconf channels.
Changelog-Added: JSON-RPC: Added `mindepth` argument to specify the number of confirmations we require for `fundchannel` and `multifundchannel`
```
> raiseValueError(str(errors))
E ValueError:
E Node errors:
E Global errors:
E - Node /tmp/ltests-x5sfpiwp/test_openchannel_hook_chaining_1/lightning-2/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "ccan/ccan/io/io.c:91 (io_new_conn_)",
E "lightningd/subd.c:773 (new_subd)",
E "lightningd/subd.c:827 (new_channel_subd_)",
E "lightningd/opening_control.c:870 (peer_start_openingd)",
E "lightningd/peer_control.c:1307 (peer_active)",
E "lightningd/connect_control.c:457 (connectd_msg)",
E "lightningd/subd.c:556 (sd_msg_read)",
E "lightningd/subd.c:357 (read_fds)",
E "ccan/ccan/io/io.c:59 (next_plan)",
E "ccan/ccan/io/io.c:407 (do_plan)",
E "ccan/ccan/io/io.c:417 (io_ready)",
E "ccan/ccan/io/poll.c:453 (io_loop)",
E "lightningd/io_loop_with_timers.c:22 (io_loop_with_timers)",
E "lightningd/lightningd.c:1181 (main)",
E "../csu/libc-start.c:308 (__libc_start_main)"
E ],
E "label": "ccan/ccan/io/io.c:91:struct io_conn",
E "parents": [
E "lightningd/lightningd.c:107:struct lightningd"
E ],
E "value": "0x2b5a898"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
This adds config and commandline options for htlc_min_msat, htlc_max_msat and
announce_discovered_ip. The default is 0msat for htlc_min_msat, unlimited for
htlc_max_msat and enabled for announce_discovered_ip.
The announce_discovered_ip gets the disable commandline switch --disable-ip-discovery
Changelog-added: Config options for htlc_min_msat, htlc_max_msat and announce_discovered_ip.
We get some memleak reports because ld owns the subd, but once
the peer/channel is freed, there's no reference for the brief time
until the subd exits.
This happens for both opening and closingd. For openingd, the
peer owns it, for others (including dualopend) the channel owns it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids reuse which can cause confusion; the long-term fix is to
rewrite this to use real channels like dualfunding does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
Generally this means converting a lazy "peer_active_channel(peer)" call
into an explicit iteration.
1. notify_feerate_change: call all channels (ignores non-active ones anyway).
2. peer_get_owning_subd remove unused function.
3. peer_connected hook: don't save channel, do lookup and iterate channels.
4. In json_setchannelfee "all" remove useless call to peer_active_channel
since we check state anyway, and iterate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means lightningd needs to create the temporary one and tell it to
openingd/dualopend, rather than the other way around.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
openingd currently holds the connection to idle peers, but we're about
to change that: it will only look after peers which are actively
opening a connection. We can start this process by disconnecting
whenever we have a negotiation failure.
We could stay connected if we wanted to, but that would be up to
connectd to decide. Right now it's easier if we disconnect from any
idle peer once it's been active.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Freeing an unconfirmed channel already releases the subd, so don't
do that explicitly.
2. Use channel->owner to transfer ownership where possible, using
channel_set_owner() which handles all the cases.
This simplifies the code and makes it more readable, IMHO.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we actually insist it's the default, but in future it could be
different.
We also need to tell openingd what the channel_type was, if we resume
via openingd_funder_complete().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Openingd can query them itself (as dualopend already does). And move
the two feature args next to each other on the wire.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It also gets rid of the requirement that close negotiation fee maximum
is the old commitment transaction. We still do that, however, to
avoid surprising old peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This touches a lot of text, mainly to change "if `option_anchor_outputs`"
to "if `option_anchors`"
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
