This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
The variable `block` (instace of `struct block`) is
allocated on the stack without being initialized, i.e. its
member `prev` points to nowhere. This causes a segmentation
fault on my machine on the binding of "prev_hash" on running
`wallet_block_add`, as the following core-dump analysis
shows:
$ egdb ./wallet/test/run-wallet ./run-wallet.core
[...]
Core was generated by `run-wallet'.
Program terminated with signal SIGSEGV, Segmentation fault.
---Type <return> to continue, or q <return> to quit---
#0 0x000008f67a04b660 in memcpy (dst0=<optimized out>, src0=0x100007f8c, length=32) at /usr/src/lib/libc/string/memcpy.c:97
97 TLOOP1(*dst++ = *src++);
(gdb) bt
#0 0x000008f67a04b660 in memcpy (dst0=<optimized out>, src0=0x100007f8c, length=32) at /usr/src/lib/libc/string/memcpy.c:97
#1 0x000008f73e838f60 in sqlite3VdbeMemSetStr () from /usr/local/lib/libsqlite3.so.37.12
#2 0x000008f73e83cb11 in bindText () from /usr/local/lib/libsqlite3.so.37.12
#3 0x000008f44bc91345 in db_sqlite3_query (stmt=0x8f6845bf028) at wallet/db_sqlite3.c:77
#4 0x000008f44bc91122 in db_sqlite3_exec (stmt=0x8f6845bf028) at wallet/db_sqlite3.c:110
#5 0x000008f44bcbb3b2 in db_exec_prepared_v2 (stmt=0x8f6845bf028) at ./wallet/db.c:2055
#6 0x000008f44bcc6890 in wallet_block_add (w=0x8f688b5bba8, b=0x7f7ffffca788) at ./wallet/wallet.c:3556
#7 0x000008f44bce2607 in test_wallet_outputs (ld=0x8f6a35a7828, ctx=0x8f6a35c0268) at wallet/test/run-wallet.c:1104
#8 0x000008f44bcddec0 in main (argc=1, argv=0x7f7ffffcaaf8) at wallet/test/run-wallet.c:1930
Fix by explicitely setting the whole structure to zero.
[ Rebuilt generated files, too --RR ]
This supports reestablish on a closed channel: we tell channeld to
respond to the reestablish message appropriately, then close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
Prior to this, sending a v1 address (or, in fact, any random crap!)
would cause the unsupporting node to unilaterally close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tor v2 hidden services have been deprecated for a while:
https://blog.torproject.org/v2-deprecation-timeline .
This prevents user from being able to set them in the configuration
and to connect to them while still letting us be able to parse them
for gossip.
Changelog-Deprecated: lightningd: v2 Tor addresses. Use v3. See https://blog.torproject.org/v2-deprecation-timeline.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
If the peer is offline when we see the funding txid, we don't actually
update the channel's info. Here, we move it up to where the scid is set,
so that we always update the channel's funding_txid to the correct
(mined) information.
Trying to put all the disconnect logic into the same path was a dumb
idea. If you asked to reconnect but passed in an 'unsaved' channel, we
would not call the 'reconnect' code.
Instead, we make a differentiation between "unsaved" channels
(ones that we haven't received commitment tx for) and handle the
disconnect for these separate from where we want to do a reconnect.
This means remembering the connection direction. We also use the address to try
to reconnect, which we shouldn't bother with if they connect to us.
For peers from the database, we currently always save the addr: we shouldn't really
do this if they connected to us, since it's not useful for reconnecting (we don't
show the addr in JSON reply to listpeers unless we're connected, so it's only an
internal issue). This is left for future work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This matters: if we connected, the address is probably usable for future connections.
But if they connected, the port is probably not (but the IP address may be).
Changelog-Added: JSON-RPC: `connect` returns "direction" ("in": they iniatated, or "out": we initiated)
Changelog-Added: plugins: `peer_connected` hook and `connect` notifications have "direction" field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
We move over to the new "warning" paradigm, instead of using
an "rbf_fail" message.
Every failure is either a warning or an error; on warnings we
hang up and reconnect later, effectively resetting the state.
Users have no idea what they would pay for unilateral closes.
At least this gives them a clue!
Reported-by: @az0re on IRC.
Changelog-Added: JSON-RPC: `listpeers` now shows latest feerate and unilaral close fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were always prefixing the `message` field with the internal type
prefix 0x0407, followed by the length prefix. Neither is needed since
the type being constant is of no interest to the plugin and the length
being implicit due to the JSON-encoding.
Reported-by: Ilya Evdokimov
Changelog-Fixed: plugin: The `custommsg` hook no longer includes the internal type prefix and length prefix in its `payload`
Changelog-Deprecated: plugin: The `message` field on the `custommsg` hook is deprecated in favor of the `payload` field, which skips the internal prefix.
No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
Prior to this, all reconnect logic lived in channeld. If you
disconnected before we finished building a funding transaction, that was
no big deal. Now, however, we're waiting for the funding to lock in in
dualopend, instead of handing straight to channeld to wait.
So we need a way to restart dualopend.
This reverts commit c239a7161b.
The goal of c239a716 was to reduce the memory footprint of our
internal UTXO set tracking, and testing against the sqlite3 backend
showed no performance impact. We have since found that the added
roundtrips to the DB server with postgres was having a considerable
performance impact, and backups would also bloat due to the increased
number of queries.
Undoing this change skips the noop updates that were causing this
regression.
Changelog-Fixed: db: Fixed a performance regression during block sync, resulting in many more queries against the DB than necessary.
This allows us to mark an offer used when an invoice derived from it
is paid, and importantly, avoid any other invoices for the offer being
paid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Still asserts that it's the standard size, but makes it a dynamic
member. For simpliciy, changes the parse_onionpacket API (it must be
a tal object now, so we might as well allocate it here to catch all
the callers).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's actually a (very unlikely) race here: we would previously have
crashed with an assertion in invoices_resolve.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a `state_change` 'cause' to a channel.
A 'cause' is some initial 'reason' a channel was created or closed by:
/* Anything other than the reasons below. Should not happen. */
REASON_UNKNOWN,
/* Unconscious internal reasons, e.g. dev fail of a channel. */
REASON_LOCAL,
/* The operator or a plugin opened or closed a channel by intention. */
REASON_USER,
/* The remote closed or funded a channel with us by intention. */
REASON_REMOTE,
/* E.g. We need to close a channel because of bad signatures and such. */
REASON_PROTOCOL,
/* A channel was closed onchain, while we were offline. */
/* Note: This is very likely a conscious remote decision. */
REASON_ONCHAIN
If a 'cause' is known and a subsequent state change is made with
`REASON_UNKNOWN` the preceding cause will be used as reason, since a lot
(all `REASON_UNKNOWN`) state changes are a subsequent consequences of a prior
cause: local, user, remote, protocol or onchain.
Changelog-Added: Plugins: Channel closure resaon/cause to channel_state_changed notification
