This field was used by `pay` to hold the bolt11 description if the bolt11
string used `h` to hash the description (which nobody ever did). If the
`h` field wasn't present, it could contain anything, as it wasn't checked.
It's really useful to have a label for payments (eg. '1 Cuban'), but adding
yet-another option would be painful, so we simply rename 'description'
to 'label' except inside the db.
This means we need to do some tricky parameter parsing to handle array
and keyword JSON arguments, but only until we remove the old name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this, there's no proof of payment, since it is the signed invoice
that make the receipt valid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In order to avoid having to ask the HSM for public keys to
their_unilateral/to_us outputs we just store the `scriptPubkey` with the UTXO,
which can then be converted to the P2WPKH address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This allows us to specify that an output must have been confirmed before the
given maximum height. This allows us to specify a minimum number of
confirmations for an output to be selected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add the change output to owned_txfilter so its entry in db will
get a confirmation_height when detected in a block by filter_block_txs
before this commit, after a 'withdraw' command, 'listfunds' would
not show our change outputs as confirmed
Modified the log message in wallet_extract_owned_outputs to
append 'CONFIRMED' when it is called with a blockheight arg.
To make distinction between (1st call) when adding owned output to the
db and (2th call) when confirmed in block.
We had a bug 0ba547ee10 caused by
short_channel_id overflow. If we'd caught this, we'd have terminated
the peer instead of crashing, so add appropriate checks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I upgraded my node with --disable-compat, and a heap of channels closed like:
CHANNELD_NORMAL:We disagree on short_channel_ids: I have 557653x0x1351, you say 557653x2373x1",
This is because the scids are strings in the databases, and it failed to parse
them properly.
Now we'll not start if that happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently use 'all-zeroes' as 'unknown', but NULL is more natural
even if we have to send it as all-zeroes over the wire due to
expressiveness limitations in our generation code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is prep work for when we sign htlc txs with
SIGHASH_SINGLE|SIGHASH_ANYONECANPAY.
We still deal with raw signatures for the htlc txs at the moment, since
we send them like that across the wire, and changing that was simply too
painful (for the moment?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always have an addr entry in the db (though it may be an ephemeral socket
the peer connected in from). We don't have to handle a NULL address.
While we're there, simplify new_peer not to take the features args;
the caller who cares immediately updates the features anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If there are two HTLCs with the same preimage, lightningd would always
find the first one. By including the id in the `struct htlc_stub`
it's both faster (normal HTLC lookup) and allows lightningd to detect
that onchaind wants to fail both of them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And use wallet_forward_status_in_db() everywhere in db code.
And clean up extra CHANGELOG.md entry (looks like rebase error?)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The left join should make sure we still get the results but
referencing the fields and/or attempting to write them to the JSON-RPC
result will cause unforeseen problems. So just omit if we forgot
something.
Noted by @cdecker, the term 'local' is grossly overused, and the hout
preimage is basically only used as a sanity check (though I've just put
a FIXME there for now).
Also eliminated spurious blank line which crept into wallet.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
failoutchannel tells us which channel to send an update for (specifically
for temporary_channel_failure); but we don't save it into the db. It's
not even clear we should, since it's a corner case and the channel might
not even exist when we come back.
So on db restore, change such errors to WIRE_TEMPORARY_NODE_FAILURE
which doesn't need an update.
We also don't memset it to 0 in the normal case (we only access if it
failcode has the UPDATE bit set) so valgrind will trigger if we're
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't save them to the database, so fix things up as we load them.
Next patch will actually save them into the db, and this will become
COMPAT code.
Also: call htlc_in_check() with NULL on db load, as otherwise it aborts
internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's no reason for the db to ever return non-NULL if it's spent. And there's
only one caller, for which that is definitely true.
Suggested-by: @cdecker
Fixes: #1934
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's an array: we were only saving the single element; if there was more than
one changed HTLC we'd get a bad signature!
The report in #1907 is probably caused by the other side re-requesting
something we considered already finalized; to avoid this particular error,
we should set the field to NULL if there's no last_sent_commit.
I'm increasingly of the opinion we want to just save all the update
packets to the db and blast them out, instead of doing this
second-guessing dance.
Fixes: #1907
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we don't try to unilaterally close after a restart, *and*
we can tell onchaind to try to use the point to recover funds when the
peer unilaterally closes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that we don't actually need the output number: it's the tx itself
which is confirmed. And the next caller doesn't have it convenient, so
eliminate it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are not confirmed by the normal methods (wallet_can_spend is false!),
so we'll deal with them manually.
We use UTXO_FIELDS in wallet_add_utxo, too, for consistency.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems like a premature optimization: it tried to cut down the number of
allocations by reusing the same `struct invoice_details` while iterating through
a number of results. But this sidesteps the checks by `valgrind` and we'd miss a
missing field that was set by the previous iteration.
Reported-by: @rustyrussell
Signed-off-by: Christian Decker <@cdecker>
`wallet_stmt2payment` always expects the same fields in the same order, so we
should make sure that we always fetch them in that order and all of them.
Well, it's generated by shachain, so technically it is a sha256, but
that's an internal detail. It's a secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tor wasn't actually working for me to connect to anything, but it worked
for 'ssh -D' testing.
Note that the resulting 'netaddr' is a bit weird, but I guess it's honest.
$ ./cli/lightning-cli connect 021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b
{
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b"
}
$ ./cli/lightning-cli listpeers
{
"peers": [
{
"state": "GOSSIPING",
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b",
"netaddr": [
"ln1qg0je0lugpzu5ttsv78vlrkhteyg9yy8fjw68qr57mfhsfyrxurzkq522ah.lseed.bitcoinstats.com:9735"
],
"connected": true,
"owner": "lightning_gossipd"
}
]
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Risks leakage. We could do lookup via the proxy, but that's a TODO.
There's only one occurance of getaddrinfo (and no gethostbyname), so
we add a flag to the callers.
Note: the use of --always-use-proxy suppresses *all* DNS lookups, even
those from connect commands and the command line.
FIXME: An implicit setting of use_proxy_always is done in gossipd if it
determines that we are announcing nothing but Tor addresses, but that
does *not* suppress 'connect'.
This is fixed in a later patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add special option where an empty host means 'wildcard for IPv4 and/or IPv6'
which means ':1234' can be used to set only the portnum.
2. Only add this protocol wildcard if --autolisten=1 (default)
and no other addresses specified.
3. Pass it down to gossipd, so it can handle errors correctly: in most cases,
it's fatal not to be able to bind to a port, but for this case, it's OK
if we can only bind to one of IPv4/v6 (fatal iff neither).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I would have liked to make it a tal object, then we'd catch most
things with our memleak detection. However, sqlite3 doesn't seem to
allow allocator overrides.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cause of 'sqlite3_close: unable to close due to unfinalized statements or unfinished backups' with the --daemon option.
Fixes: #1420
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we intuit it from the fd being closed, but that may happen out
of order with when the master thinks it's dead.
So now if the gossip fd closes we just ignore it, and we'll get a
notification from the master when the peer is disconnected.
The notification is slightly ugly in that we have to disable it for
a channel when we manually hand the channel back to gossipd.
Note: as stands, this is racy with reconnects. See the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simplification of the offset calculation to use the rescan parameter, and rename
of `wallet_first_blocknum`. We now use either relative rescan from our last
known location, or absolute if a negative rescan was given. It's all handled in
a single location (except the case in which the blockcount is below our
precomputed offset), so this should reduce surprises.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is a big simplification, we just report the DBs current blockchain height
as the point to continue scanning, or the passed in default. No more guessing
where to continue from or whether the wallet was used and when it first saw the
light of day.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The only use for these was to compute their txids so we could notify depth
in case of reorgs.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Repeated crashes could result in the `last_processed_block` variable being
pushed further and further into the past (in some cases going as far back as
scanning blocks from 2012...). This is a stop-gap solution that just lower
bounds the value to what is the first possible block we might be interested in
LN, until we have the 0-rescan fix I'm working on.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
There are two very hard problems in software engineering:
1. Off-by-one errors
In this case we were rolling back further than needed and we were starting the
catchup one block further than expected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So we know how much counterparty could theoretically steal from us
(msatoshi_to_us - msatoshi_to_us_min) and how much we could
theoretically steal from counterparty (msatoshi_to_us_max -
msatoshi_to_us).
For more piloting goodness.
This fixes the root cause of https://github.com/ElementsProject/lightning/issues/1212
where we deleted the payment because we wanted to retry, then retry failed
so we had an (old) HTLC without a matching payment. We then fed that
HTLC to onchaind, which tells us it's missing, and we try to fail the
payment and deref a NULL pointer.
Fixes: #1212
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies things, and means it's always in the database. Our
previous approach to creating it on the fly had holes when it was
created for onchaind, causing us to use another every time we
restarted.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our testing also reveals a bug: we start lightningd and shut it down
before fully processing the blockchain, so we don't set
last_processed_block. Fix that by setting it immediately once we have
a block: worst case it goes backwards a little.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we already know about an output we would stop scanning the remaining
outputs. Known outputs happen whenever we extracted from our own transactions
and then extracted again from blocks. We would not update if the first update
fails.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Will be used later to filter out outputs we are interested in, and
trigger db updates with them.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Each state (effectively, each daemon) has two slots: a permanent slot
if something permanent happens (usually, a failure), and a transient
slot which summarizes what's happening right now.
Uncommitted channels only have a transient slot, by their very nature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And now we can finally do the db upgrade to remove any OPENINGD
channels once, since we never put them back.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's giant, but it's encapsulating at least. It is called from the wallet
code when loading channels, or from the opening code when converting
an uncommitted_channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now any struct channel is a genuine channel, the following fields are
always valid:
1. funding_txid: doesn't need to be a pointer.
2. our_msatoshi: doesn't need to be a pointer.
3. last_sig: doesn't need to be a pointer.
4. channel_info: doesn't need to be a pointer.
In addition, 'last_tx' is always valid.
The main effect is to remove a whole heap of branches from the wallet code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we create new entries from wallet_channel_insert(), there's no
need for the branches. And indeed, many wallet functions can be
static.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We derive the seed from this, so it needs to be unique, but using
rowid forced us to put the channel into the db early, before it
was ready.
Instead, use a counter to ensure uniqueness, initialized when we load
existing peers. This doesn't need to touch the database at all.
As we now have only two places where the channel is committed (the
funder and fundee paths), so we create a new explicit
'wallet_channel_insert()' function: 'wallet_channel_save()' now just
updates.
Note that this also fixes some weirdness in
wallet_channels_load_active: we strangely avoided loading channels in
CLOSINGD_COMPLETE (which fortunately was a transient state, so
unlikely anyone hit this). Note that since the lines above already
delete all the OPENINGD channels, we now simply load them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adds a simple check that compares genesis-blockhashes from the
chainparams against the blockhash that the wallet was created
with. The wallet is network specific, so mixing is always a bad idea.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
ZmnSCPxj queried the unilateral close case, so make that clearer.
Christian raise concerns about existing channels, so make it clear
what we're doing there too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We only need to do that if it's possible there's something to find:
either we have an unspent output from a unilateral close, or we've
ever handed out an address.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With fallback depending on chainparams: this means the first upgrade
will be slow, but after that it'll be fast.
Fixes: #990
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually did this, but sometimes they were named after what they did,
rather than what they cleaned up.
There are still a few exceptions:
1. I didn't bother creating destroy_xxx wrappers for htable routines
which already existed.
2. Sometimes destructors really are used for side-effects (eg. to simply
mark that something was freed): these are clearer with boutique names.
3. Generally destructors are static, but they don't need to be: in some
cases we attach a destructor then remove it later, or only attach
to *some* cases. These are best with qualifiers in the destroy_<type>
name.
Suggested-by: @ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This provides a sanity check that we are in sync, and also keeps the
logic in the program and out of the SQL.
Since the destructor now doesn't clean up the peer, there are some
wider changes to be made when cleaning up. Most notably we create
lots of channels in run-wallet.c and they previously freed the peer:
now we need free the peer explicitly, so we need to free them first.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Much like the database; peer contains id, address, channel contains
per-channel information. Where we create a channel, we always create
the peer too.
For the moment, peer->log and channel->log coexist side-by-side, to
reduce some of the churn.
Note that this changes the API to dev-forget-channel: if we have more
than one channel, we insist they specify the short-channel-id.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Both when we forget about an opening peer, and at startup. We're
going to be relying on this, and the next patch, as we refactor
peer/channel handling to mirror the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Still writing the channel since some of the channel setup parameters
depends on `chan->id` to be set. If we later set the `chan->id`
signatures fail. This prevents OPENINGD channels showing up after
restarting.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We were sideloading it, which is awkward, now it's a field that we can
actually use in the code.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Maintaining it was always fraught, since the command could go away
if the JSON RPC died. Most recently, it was broken again on shutdown
(see below).
In future we may allow pay commands to block on previous payments, so
it won't even be a 1:1 mapping. Generalize it: keep commands in a
simple list and do a lookup when a payment fails/succeeds.
Valgrind error file: valgrind-errors.5732
==5732== Invalid read of size 8
==5732== at 0x4149FD: remove_cmd_from_hout (pay.c:292)
==5732== by 0x468BAB: notify (tal.c:237)
==5732== by 0x469077: del_tree (tal.c:400)
==5732== by 0x4690C7: del_tree (tal.c:410)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x40F1EA: main (lightningd.c:362)
==5732== Address 0x69df148 is 1,512 bytes inside a block of size 1,544 free'd
==5732== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x469150: del_tree (tal.c:421)
==5732== by 0x46948A: tal_free (tal.c:509)
==5732== by 0x4198F2: free_htlcs (peer_control.c:1281)
==5732== by 0x40EBA9: shutdown_subdaemons (lightningd.c:209)
==5732== by 0x40F1DE: main (lightningd.c:360)
==5732== Block was alloc'd at
==5732== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5732== by 0x468C30: allocate (tal.c:250)
==5732== by 0x4691F7: tal_alloc_ (tal.c:448)
==5732== by 0x40A279: new_htlc_out (htlc_end.c:143)
==5732== by 0x41FD64: send_htlc_out (peer_htlcs.c:397)
==5732== by 0x41511C: send_payment (pay.c:388)
==5732== by 0x41589E: json_sendpay (pay.c:513)
==5732== by 0x40D9B1: parse_request (jsonrpc.c:600)
==5732== by 0x40DCAC: read_json (jsonrpc.c:667)
==5732== by 0x45C706: next_plan (io.c:59)
==5732== by 0x45D1DD: do_plan (io.c:387)
==5732== by 0x45D21B: io_ready (io.c:397)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The previous tests didn't make sense anyway, but I think they were trying
to exclude onchain channels.
We delete completely forgotten channels anyway now, so we don't need
such testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
From test_reconnect_sender_add1:
lightningd(13643):BROKEN: backtrace: wallet/wallet.c:1537 (wallet_payment_set_status) 0x561c91b03080
lightningd(13643):BROKEN: backtrace: lightningd/pay.c:67 (payment_failed) 0x561c91ac4f99
lightningd(13643):BROKEN: backtrace: lightningd/peer_htlcs.c:132 (fail_out_htlc) 0x561c91acf627
lightningd(13643):BROKEN: backtrace: lightningd/peer_htlcs.c:321 (hout_subd_died) 0x561c91acfb62
When payment fails, we call wallet_payment_set_status; this is perfectly
possible before it's been committed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For performance, we delay entering the 'wallet_payment' into the db
until we actually commit to the HTLC (when we have to touch the DB
anyway).
This opens a race where we can try to pay twice, and since it's not in
the database yet, we don't notice the duplicate.
So remove the temporary payment field from htlc_out, which was always
an uncomfortable hack, and make the wallet code abstract over the
deferred entry a little by maintaining a 'unstored_payments' list
and incorporating that in results.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need these to decode any returned errors.
We remove it from struct pay_command too, and load directly from db
when we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should be saving this, as it's our proof of payment. Also, we return
it if they try to pay again.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Paid invoices need to know how much was actually paid: both for the case
where no 'msatoshi' amount was specified, and for the normal case, where
clients are permitted to overpay in order to help them disguise their
payments.
While we migrate the db, we leave this field as 0 for old paid
invoices. This is unhelpful for accounting, but at least clearly
indicates what happened if we find this in the wild.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This reuses the same code internally, and also now means that we deal
correctly with "any" msatoshi invoices: the old code would a return
'msatoshi' of 0 in that case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were using int32 for msatoshi values for outputs, which would
overflow for values larger than 2^32.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is necessary to grad the their_unilateral/to-us outputs since
they aren't being harvested by `onchaind`
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This gives us a lower bound on where funding tx could be.
In theory, it could be lower than this if we get a reorganization, but
in practice this is already a 1-block buffer (since we can't get into
current block, only the next one).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's only used for tests, but it's better to use the wallet_channels_load_active like
the real code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_txid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It looks like we were missing the address on insert into the peers table. This
will insert the address formatted by fmt_wireaddr. This happens to include the
ip and port.
This is fine, since parse_wireaddr has been updated to parse ports in ip address
strings.
Signed-off-by: William Casarin <jb55@jb55.com>
Accuracy improvements:
1. We assumed the output was a p2wpkh, but it can be user-supplied now.
2. We assumed we always had change; remove this for wallet_select_all.
Calculation out-by-one fixes:
1. We need to add 1 byte (4 sipa) for the input count.
2. We need to add 1 byte (4 sipa) for the output count.
3. We need to add 1 byte (4 sipa) for the output script length for each output.
4. We need to add 1 byte (4 sipa) for the input script length for each input.
5. We need to add 1 byte (4 sipa) for the PUSH optcode for each P2SH input.
The results are now a slight overestimate (due to guessing 73 bytes
for signature, whereas they're 71 or 72 in practice).
Fixes: #458
Reported-by: Jonas Nick @jonasnick
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We weren't incrementing the `col` for the `local_shutdown_idx` field,
which meant that all following fields were incorrect. I removed the
`col` computation and opted for absolute indices instead, since they
are way less brittle. Just remember to add new fields to the query at
the end so we don't have to shift too often :-)
Reported-by: William Casarin @jb55
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The wire protocol uses this, in the assumption that we'll never see feerates
in excess of 4294967 satoshi per kiloweight.
So let's use that consistently internally as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Used by the JSON-RPC for the listtransfers call. Currently does not
support any form of paging.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We save location where transaction was started, in case we try to nest.
There's now no error case; db_exec_mayfail() is the only one.
This means the tests need to override fatal() if they want to intercept
these errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to be always in a transaction soon.
Note the rollback we used to do was an optimization: the utxo destructors
would already clean up the new UTXOs in the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the only case where we actually rely on the db to ensure we don't
do something twice: don't error out if it fails.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Nesting is provided by only actually performing the outermost
transaction and simulating the nested ones. This still allows us to
ensure on lower levels that we are in the context of a transaction
without having to resort to keeping explicitly track of it in the
calling code.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
In addition we also set some of the test values to a pattern instead
of just `memset`ting it to 0, which may hide some crossed lines.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We use these quite often and it is cumbersome having to do these
simple conversions inline, so just expose pseudo-sqlite3 methods to
bind and extract from/to a stmt.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
"near \"AND\": syntax error"
This was caught by the "always keep errors for db_commit_transaction".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd like to not keep them in memory and retrieve them on-demand when
`onchaind` is launched. This uses the `channel_htlcs` table as backing
but only fetches the minimal necessary information.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is a necessary evil since at the time we load `struct htlc_out`
associated with a channel we might not have loaded the `struct
htlc_in` that it depends on, so we defer the rewiring until we have
loaded all HTLCs for all channels. At that point rewiring MUST work,
otherwise we report a failure.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
While loading HTLCs from the database we might not yet have all the
incoming HTLCs loaded when loading a dependent htlc_out. So we defer
the wiring of the HTLCs until we are sure we have them loaded.
This is also the first step towards keeping that association only in
the database, since otherwise we cannot selectively load channels from
DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was causing some compilation trouble on 32bit systems, see #256.
Reported-by: @shsmith
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Also, we split the more sophisticated json_add helpers to avoid pulling in
everything into lightning-cli, and unify the routines to print struct
short_channel_id (it's ':', not '/' too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The peer->seed needs to be unique for each channel, since bitcoin
pubkeys and the shachain are generated from it. However we also need
to guarantee that the same seed is generated for a given channel every
time, e.g., upon a restart. The DB channel ID is guaranteed to be
unique, and will not change throughout the lifetime of a channel, so
we simply mix it in, instead of a separate increasing counter.
We also needed to make sure to store in the DB before deriving the
seed, in order to get an ID assigned by the DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the big one, and it's completely anticlimactic: it loads all
channels that have reached opening and are not marked as
closingd_complete into memory, that's it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
They happen to advance at the same pace but mixing them may have
unforeseen consequences, and I have done so a few times already so
this explicitly separates them.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was supposed to be a temporary solution anyway, and I had a
rather annoying mixup between peer_id and unique_id, the latter of
which is actually a connection identifier.
If we kill the daemon without performing any commits we ended up with
a 0 instead of UINT48_MAX which was expected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
And store in peer->last_tx/peer->last_sig like all other places,
that way we broadcast it if we need to.
Note: the removal of tmpctx in funder_channel() is needed because we
use txs[0], which was allocated off tmpctx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Definitely not as nice as it could be, but it works for now. This is
primarily intended as a simple dump method that just saves everything
to the database. We will later use smaller incremental updates to
update specific things. wallet_channel_save serves both to insert as
well as update.
This needed a rather annoying hack since sqlite3 can only store
integers up to 2^63, so I just squash it down/invert it, and hope that
we never ever have more than 2^63 updates.
Splitting the detection for outputs that we own into a separate
`wallet_extract_owned_outputs` function and use it when the broadcast
succeeds to re-add the change output back to the database.
Wallet should really be the container for anything bip32 related, so
I'd like to slowly wean off of `ld->bip32_base` in favor of
`ld->wallet->bip32_base`
We'll re-use them a few times so having them at a central location is
nice. We also fix a bug that was unreserving UTXO entries upon free,
instead of promoting them to being spent.
Since we have a simple way to query the database for UTXOs we can
simplify some of the coin selection logic. That gets rid of the
in-memory list of UTXOs.
