We were checking against hardcoded hrp and prefixes. Now we parametrize via
the chainparams.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we will soon be writing the `liquid-regtest` section instead of the
`regtest` section we should make that configurable.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
There were a few places we were rebuilding the config path by appending
`bitcoin.conf` to the bitcoin directory. So now we just remember it and
reference it instead.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Note the use of sqrt, which makes a 13 second timeout under Travis
(180 second), or 7 seconds normally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We will soon have a postgres backend as well, so we need a way to control the
postgres process and to provision DBs to the nodes. The two interfaces are the
dsn that we pass to the node, and the python query interface needed to query
from tests.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Throwing an exception while killing all nodes meant that
we aren't cleaning up all the nodes properly. Instead,
collect the errors, and return them back to the upper level,
where we report them and terminate as expected.
This is an issue that was raised in #2665: some of the dependencies where
causing warnings to be added to the logs about deprecated dependencies. Since
I did not get these warnings I just blanket updated all the dependencies in
the hopes of getting the warnings to resolve.
Signed-off-by: Christian Decker <@cdecker>
And clean up some dev ones which actually happen (mainly by calling
channel_fail_permanent which logs UNUSUAL, rather than
channel_internal_error which logs BROKEN).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fail this at the moment, since we rely on shutdown to do the cleanups
for us.
(Also had to fix the unclean shutdown path: the caller checks the rc unless
mayfail is set, and of course it's not zero since we just SIGTERM'd it).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now without bitcoind restart.
bitcoin-cli `prioritisetransaction` came to the rescue!
Its argument `fee_delta` (apparently) lowers the txs _effective_ feerate
soo low that bitcoind wont mine it ... untill we raise it when we want
it to be mined.
We try to look up the funding tx, but it's already spent that to fund
the channel, so we need txindex if this test is to work reliably.
It's not clear to me why this *ever* worked, but if fails on my new
ThreadRipper build machine with valgrind:
> wallettx = l1.bitcoin.rpc.getrawtransaction(wallettxid, True)
...
E bitcoin.rpc.InvalidAddressOrKeyError: {'code': -5, 'message': 'No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.'}
/usr/lib/python3/dist-packages/bitcoin/rpc.py:231: InvalidAddressOrKeyError
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For performance reasons we start the lightningd instances in
parallel. However, if we only assign the numeric ids (used for log-prefixes
and home directories) when we are already running in parallel, we are not
guaranteed to get the numeric ids matching the return value of `get_nodes` or
`line_graph`. With this patch we now select numeric ids before parallelizing
the start.
Signed-off-by: Christian Decker <@cdecker>
It was waiting for a remote channel, but not for all the interesting
channels we want to check. It can sometimes happen that further away
channels are added before closer ones are added, depending on
propagation path, flush timers and bitcoind poll timers. This now just
checks for all channels, which also reduces the ambiguity of whether
we selected a path solely because we were lacking alternatives.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We were restarting the with the nodes before, which was causing some
port contention. This is more natural since `bitcoind` will take care
of terminating all proxies it returned.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We used to have a bug where decoderawtransaction would fail, fixed in
fedcfd661 (pytest: hand 'True' to decoderawtransaction so it doesn't
get confused.).
So we can remove the fallback decode, and might as well extract the
ugliness into a helper function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only used by gossipd for channel elimination.
Also print them in canonical form (/[01]), so tests need to be
changed.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we are planning to release a bug fix release, and the plugin
subsystem is not yet complete, it is better to make plugin support
opt-in while we continue testing.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It wasn't JSON formatted either so there was no nice pretty-printing
way. This jsonifies and pretty prints it.
Signed-off-by: Christian Decker <@cdecker>
Because gossip in this case takes up to a minute, this test took 10
minutes. The workaround is to do the waiting-for-gossip all at once.
Now it takes 362 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In one case we can reduce, in the others we eliminated if VALGRIND.
Here are the ten slowest tests on my laptop:
469.75s call tests/test_closing.py::test_closing_torture
243.61s call tests/test_closing.py::test_onchain_multihtlc_our_unilateral
222.73s call tests/test_closing.py::test_onchain_multihtlc_their_unilateral
217.80s call tests/test_closing.py::test_closing_different_fees
146.14s call tests/test_connection.py::test_dataloss_protection
138.93s call tests/test_connection.py::test_restart_many_payments
129.66s call tests/test_gossip.py::test_gossip_persistence
128.73s call tests/test_connection.py::test_no_fee_estimate
122.46s call tests/test_misc.py::test_htlc_send_timeout
118.79s call tests/test_closing.py::test_onchain_dust_out
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generate was deprecated some time ago, so we added the generate_block()
helper. But many calls crept back in, and git master refuses it.
(test_blockchaintrack relied on the return value, so make generate_block
return the list of blocks).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After Ubuntu 18.10 upgrade, lots of new flake8 warnings.
$ flake8 --version:
3.5.0 (mccabe: 0.6.1, pycodestyle: 2.4.0, pyflakes: 1.6.0) CPython 3.6.7rc1 on Linux
Note it seems that W503 warned about line breaks before binary
operators, and W504 complains about them after. I prefer W504, so
disable W503.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Occasional failure in test_fulfill_incoming_first where the channel
closed before the final message from dev_disonnect was read. Cause
was the peer writing a gossip msg and failing due to ECONNRESET, before
it read the final message.
(Managed to reproduce under strace -f, FTW).
This is really a symptom of the fact that line_graph's announce=True
didn't wait for node announcements. Let's do that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adapts the `test_forward_stats` test to include checks for the
`forwarded_payments` table. Will add checks for the `listforwardings`
RPC call next.
Signed-off-by: Christian Decker <@cdecker>
We extract the tx from the logs, and then we wait until that hits
the mempool. This is more reliable than 'sendrawtx' in the logs,
which might catch a previous sendrawtx; it's also more explicit
that we expect that tx exactly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
BOLT 7's been updated to split the flags field in `channel_update`
into two: `channel_flags` and `message_flags`. This changeset does the
minimal necessary to get to building with the new flags.
Got a spurious failure in test_no_fee_estimate; we fired too soon from the logs (presumably
we raced in on the first response, but estimatesmartfee gets called 3 times).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a simple reverse proxy that `bitcoin-cli` can talk to when invoked by
`lightningd`. It allows us to trace `bitcoin-cli` calls, and intercept calls to
mock the replies, better than the current bash-script based method.
And no more filtering out messages, as we should no longer spam the
logs with them (the 'Connected json input' one was removed some time
ago).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tests were failing when in the same thread after a test which set
log_all_io=True, because SIGUSR1 seemed to be turning logging *off*.
This is due to Python using references not copies for assignment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required for the next test, which has to log messages from channeld
as soon as it starts (so might be too late if it sends SIGUSR1).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful it we want to intercept bitcoin-cli first.
We move the getinfo() caching into start(), as that's when we can actually
use RPC.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to use it to override specific commands. It's non-valgrinded
already since we use '--trace-children-skip=*bitcoin-cli*' so the overhead
should be minimal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's now a potential race: the source peer connect returns, but in
destination peer the master hasn't read the connect message from
connectd, so the peer isn't in listpeers yet.
(Previously the connection stayed in connectd, so there was no such
window).
This is an occasional issue in a few places.
Note that we take the opportunity to speed up test_disconnectpeer too
while we're there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, I found lightning_openingd processes after running
tests. When we use the dev_disconnect blackhole '0' option, they
stick around until the dev_disconnect file is truncated (there is only
so much you can do with only a file descriptor), so let's do that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The following changes revealed this race, where expecting listchannels()
to contain two channels immediately after fund_channel() was racy.
We also derive the short_channel_id first, so we can search logs for the
exact messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The next patches get better at reconecting, so if we use dev-allow-localhost
nodes can often find each other and reconnect before shutting down; only
use that option where we actually need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I could not figure out why test_announce_address suddenly stopped working:
I had previously been using DEVELOPER=1 on the cmdline for historical
reasons when testing locally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Python dict can't have duplicate entries, but some options can be specified
multiple times. The easiest way is to put a list in the dict.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
E ConnectionRefusedError: [Errno 111] Connection refused
And in debug.log:
2018-05-17T04:06:35Z Warning: Config setting for -rpcport only applied on regtest network when in [regtest] section.
Unfortunately, current versions including 0.16.1 *ignore* the contents of
a '[regtest]' section, so we need it in *both* places.
Also remove the misleading 'rpcport' initialization which we always
override.
Note that we don't fix this message though:
2018-05-17T04:06:35Z Config options rpcuser and rpcpassword will soon be deprecated. Locally-run instances may remove rpcuser to use cookie-based auth, or may be replaced with rpcauth. Please see share/rpcuser for rpcauth auth generation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For some reason, we created a second bitcoin.conf in the regtest/ directory,
which AFAICT nothing uses.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's not optional for our test setup, and this makes it easier to invoke
bitcoin-cli manually, for example.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When opening a number channels from a single node we could end up not waiting
for the funding tx to make it into the mempool, instead triggering on a previous
`sendrawtransaction` or `CHANNEL_NORMAL` in the logs. This now checks that the
actual funding transaction makes it into the mempool and that we wait for the
depth change for that specific channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Mostly `lightningd` complaining about not being able to estimate fees. Safes us
a lot of log space when some tests time out, and safes us a few context switches
between log appender and log watchers.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Make --override-fee-rates a dev option. We use default-fee-rate in
its place, which (since bitcoind won't give fee estimates in regtest
mode for short chains) gives an effective feerate of 15000/7500/3750.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
