Most unexpected ones are still 1, but there are a few recognizable error codes
worth documenting.
Rename the HSM ones to put ERRCODE_ at the front, since we have non-HSM ones
too now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Returning an warning message when the pub key is not specified and there is no node in the graph.
We try to help people that use core lightning as a signer and nothings else.
Changelog-Deprecated: rpc: checkmessage return an error when the pubkey is not specified and it is unknown in the network graph.
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than a generic "add member", provide two routines: one which
doesn't quote, and one which does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's a deprecation, we simply ignore one, rather than properly
checking they match etc.
Fixes: #5386
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The gossip_store version was bumbed to 10 in PR #5239 and #5375 has
apparently not been rebased on top of that when it was merged, causing
the `run-gossmap_canned` test to fail when parsing the v9 gossip
store.
Changelog-None
This will be used to decouple internal use of gossip from what is
passed to gossip peers. Updates GOSSIP_STORE_VERION to 10.
Changelog-Changed: gossip_store updated to version 10.
Usually we won't see this, since private is deleted. But we could
have already read the private channel before that. Handle it properly.
(Tested by removing the gossip_store deletion code and making sure
this worked).
We have to fix up the test, which announces a channel twice!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thanks to @zerofeerouting for another report.
"desc" here is the sanitized message, eg:
"ERROR error channel 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef: internal error"
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to 0.11.0 we had cases where we would treat errors
as warnings: regretfully, this is still needed. This message
in particular has been widely reported, and it now causes
channel force closes.
Downgrade and log. I did insert some snarky log message earlier,
but hey, I'm sure CLN has done worse things to our peers!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: treat LND "internal error" as warnings, not force close events (as we did in v0.10).
@whitslack complained of large CPU usage by connectd at startup;
I ran perf record on connectd on my machine (which sees a little spike, only)
and I see the cost of reading and discarding the entries:
```
- 95.52% 5.24% lightning_conne lightning_connectd [.] gossip_store_next
- 90.28% gossip_store_next
+ 40.27% tal_alloc_arr_
+ 22.78% tal_free
+ 11.74% crc32c
+ 9.32% fromwire_peektype
+ 4.10% __libc_pread64 (inlined)
1.70% be32_to_cpu
```
Much of this is caused by the search for our own gossip: keeping this separately
would be even better, but this fix is minimal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: connectd: reduce initial CPU load when connecting to peers.
This changes many fields: in non-deprecated mode, they're now raw integers.
This was always the intention, but the transition was never completed.
Suggested-By: @ShahanaFarooqui
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: "_msat" fields can be raw numbers, not "123msat" strings (please handle both!)
Changelog-Deprecated: JSON-RPC: "_msat" fields as "123msat" strings (will be only numbers)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
This likely lead to a number of false errors when attempting to
route. We deemed a channel to be unusable as soon as either direction
isn't usable. This is bad since it excludes not only zeroconf
channels (which have different scids for the two directions), but it
also excludes any channel that we haven't seen an update from
yet. This was likely introduced when attemting to exclude nodes that
haven't sent a disable, but their peer has, but this is not necessary
as the unresponsive node would be marked as isolated by all its peers,
so we don't need to artificially mark a channel direction as disabled
when really we can't even enter the node to traverse the channel in
that direction.
Changelog-Fixed: routing: Fixed an issue where we would exclude the entire channel if either direction was disabled, or we hadn't seen an update yet.
After this, we can exactly reproduce the vectors (in DEVELOPER mode).
1. Move payment_metadata position to match test vector.
2. Create flag to suppress `c` field production.
3. Some vectors put secret before payment_hash, hack that in.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
