For online services, shorter may be fine, but for casual use I'm usually
in a different timezone than the payer, so needs to be at least 1 day.
Certainly 1 hr is short if they have to open a channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd like to display the receive and resolution times in the forwardings
table. In order to remember the receive time we need to store it in the DB
along with the other information.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The timestamps are UNIX-Timestamps with 3 decimal places, even though we have
the timestamp with nanosecond granularity. This is deliberate choice not to
over overload the users :-)
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Travis caught an error where this happened: when closingd reconnects it
was sending the reestablish message without the option_dataloss_protect
fields. That causes the peer to fail the channel!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make json_start_member allocate extra space, which caller can directly
print into, and also make caller call js_written_some() itself.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:35071-36817(35617.2+/-7e+02)
vsz_kb:2637488
store_rewrite_sec:35.790000-37.500000(36.6375+/-0.63)
listnodes_sec:0.690000-0.780000(0.72+/-0.035)
listchannels_sec:34.600000-36.340000(35.36+/-0.77)
routing_sec:30.310000-30.730000(30.445+/-0.17)
peer_write_all_sec:50.830000-52.750000(51.82+/-0.89)
MCP notable changes from previous patch (>1 stddev):
-listnodes_sec:0.720000-0.950000(0.86+/-0.077)
+listnodes_sec:0.690000-0.780000(0.72+/-0.035)
-listchannels_sec:40.300000-41.080000(40.668+/-0.29)
+listchannels_sec:34.600000-36.340000(35.36+/-0.77)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't result in a speedup for our benchmark, since we use the
cli tool which does the formatting.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:33422-36830(35196.2+/-1.2e+03)
vsz_kb:2637488
store_rewrite_sec:36.030000-37.630000(36.794+/-0.52)
listnodes_sec:0.720000-0.950000(0.86+/-0.077)
listchannels_sec:40.300000-41.080000(40.668+/-0.29)
routing_sec:30.440000-31.030000(30.69+/-0.2)
peer_write_all_sec:50.060000-52.800000(51.416+/-0.91)
MCP notable changes from 2 patches ago (>1 stddev):
-listchannels_sec:48.560000-55.680000(52.642+/-2.7)
+listchannels_sec:40.300000-41.080000(40.668+/-0.29)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is one of the more significant fields we print, but there's no
need to allocate a temp buffer or escape the resulting string.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:34048-36002(35070.4+/-8.5e+02)
vsz_kb:2637488
store_rewrite_sec:35.110000-38.120000(36.604+/-1.2)
listnodes_sec:0.830000-1.020000(0.95+/-0.065)
listchannels_sec:48.560000-55.680000(52.642+/-2.7)
routing_sec:29.800000-33.170000(30.536+/-1.3)
peer_write_all_sec:49.260000-52.490000(50.316+/-1.1)
MCP notable changes from previous patch (>1 stddev):
-listchannels_sec:55.390000-58.110000(56.998+/-0.99)
+listchannels_sec:48.560000-55.680000(52.642+/-2.7)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can save significant space by combining both sides: so much that we
can reduce the WIRE_LEN_LIMIT to something sane again.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:34467-36764(35517.8+/-7.7e+02)
vsz_kb:2637488
store_rewrite_sec:35.310000-36.580000(35.816+/-0.44)
listnodes_sec:1.140000-2.780000(1.596+/-0.6)
listchannels_sec:55.390000-58.110000(56.998+/-0.99)
routing_sec:30.330000-30.920000(30.642+/-0.19)
peer_write_all_sec:50.640000-53.360000(51.822+/-0.91)
MCP notable changes from previous patch (>1 stddev):
-store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
+store_rewrite_sec:35.310000-36.580000(35.816+/-0.44)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- add config value min_capacity_sat that will replaces the magic value
min_effective_htlc_capacity = AMOUNT_MSAT(1000000)
- add config switch min_capacity_sat
Adding a giant IO message simply causes it to be pruned immediately,
so truncate it if it's more than 1/64 the max size.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This causes natural batching, rather than on every little addition of
JSON formatting.
Before, to listchannels 100,000 channels took 82.48 seconds, after
6.82 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us benchmark without a valid blockchain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_gossipd__dev_option_to_allow_unknown_channels.patch':
fixup! gossipd: dev option to allow unknown channels.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I started by trying to change the current infrastructure, but this is
really the only completely sync hook which makes sense; it needs to avoid
doing the db_transation, as well as waiting, and using a callback is just
overkill.
So with some regret, I open coded it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Rename channel_funding_locked to channel_funding_depth in
channeld/channel_wire.csv.
2. Add minimum_depth in struct channel in common/initial_channel.h and
change corresponding init function: new_initial_channel().
3. Add confirmation_needed in struct peer in channeld/channeld.c.
4. Rename channel_tell_funding_locked to channel_tell_depth.
5. Call channel_tell_depth even if depth < minimum, and still call
lockin_complete in channel_tell_depth, iff depth > minimum_depth.
6. channeld ignore the channel_funding_depth unless its >
minimum_depth(except to update billboard, and set
peer->confirmation_needed = minimum_depth - depth).
- This will make a channel loop when 'id' argument was "all".
- The response will now contain an array of objects (peer_id, scid, ...)
- It will skip channels in invalid states.
- Moves iffy channel/peer param stuff to param_channel_or_all
We set the version BIP32_VER_TEST_PRIVATE for testnet/regtest
BIP32 privkey generation with libwally-core, and set
BIP32_VER_MAIN_PRIVATE for mainnet.
For litecoin, we also set it like bitcoin else.
1. amount operations should force you to check validity, rather than
needing a separate call, so make amount_msat_to_u32 return bool,
and WARN_UNUSED_RESULT it.
2. Create a special parsing function for this; not only does this mean
we now only need that one amount call, but also 'check' will correctly
fail with invalid amounts (it only does the parsing step).
3. If we create a primitive which we immediately take(), we allocate it
off NULL to make it clear we expect its lifetime to end here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- Intrduce DB update `channel` values: `feerate_base` and `feerate_ppm`
- Make fist use of now context realted DB migration
- Add `struct channel` members of the same name
- Use struct values instead of config when commiting new channels
New name is less confusing, and most people should be transitioning to
listpays rather than this anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This field was used by `pay` to hold the bolt11 description if the bolt11
string used `h` to hash the description (which nobody ever did). If the
`h` field wasn't present, it could contain anything, as it wasn't checked.
It's really useful to have a label for payments (eg. '1 Cuban'), but adding
yet-another option would be painful, so we simply rename 'description'
to 'label' except inside the db.
This means we need to do some tricky parameter parsing to handle array
and keyword JSON arguments, but only until we remove the old name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this, there's no proof of payment, since it is the signed invoice
that make the receipt valid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
onchaind is in the correct position to tell us about them, so have it pass
them up as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
In order to avoid having to ask the HSM for public keys to
their_unilateral/to_us outputs we just store the `scriptPubkey` with the UTXO,
which can then be converted to the P2WPKH address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We want to disallow using unconfirmed outputs by default, so making the
default 1 confirmation seems a good idea. This also matches `bitcoind`s
minimum confirmation requirement.
Arming however breaks some of our tests, so I used `minconf=0` for the
breaking tests and added a new test specifically for the `minconf` parameter
for `fundchannel`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
