A failed returncode check could result in the cleanup for other
lightningds to be skipped. Now make sure to cleanup all and then
rethrow an exception that contains all returncodes.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We used to simply kill the daemon, which in some cases could result in
half-written crashlogs and similar artifacts such as half-completed
RPC calls. Now we ask lightningd to stop nicely, give it some time and
only then kill it. We also return the returncode of the daemon.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
peer_fail_permanent() frees peer->owner, but for bad_peer() we're
being called by the sd->badpeercb(), which then goes on to
io_close(conn) which is a child of sd.
We need to detach the two for this case, so neither tries to free the
other.
This leads to a corner case when the subd exits after the peer is gone:
subd->peer is NULL, so we have to handle that too.
Fixes: #282
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that it should really be a flag to daemon on construction, too,
but that may interfere with another concurrent branch so I've deferred.
Suggested-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We re-use the value for reasonable_depth given by the master, and we
tell it when our timeout transactions reach that depth.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In the next test, we wait for multiple 'sendrawtx exit 0' which
doesn't work because we use a set not a list, and the current code
would match multiple against the same thing. The result was we didn't
wait for the final sendrawtransaction, and occasionally had test
failures as a result.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we sent out an HTLC-Timeout or HTLC-Success tx, we need to spend
it after the timeout so it's safely in our wallet.
We generalize the tx_type OUR_UNILATERAL_TO_US_RETURN_TO_WALLET to
OUR_DELAYED_RETURN_TO_WALLET, since we use it for HTLC transactions too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we see an offered HTLC onchain, we need to use the preimage if we
know it. So we dump all the known HTLC preimages at startup, and send
new ones as we discover them.
This doesn't cover preimages we know because we're the final
recipient; that can happen if an HTLC hasn't been irrevocably
committed yet. We'll do that in a followup patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
lightningd can crash on shutdown if it's in the middle of getchaintips;
we free the conn, the finished callback is called (process_chaintips),
and it reports that it received an empty result.
The simplest fix is to set a flag in the struct bitcoind destructor,
and avoid the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either when it exits with a signal, or sends an error status message.
Then we make test_lightningd.py use it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We simply kill lightningd; we should stop it properly and have a timeout
to kill it if that fails. However, that's beyond my python skills :(
So we just look for crash.log. Unfortunately, we usually kill
lightningd before it's finished writing it. So we look for it and
don't kill lightningd, just wait in this case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the step where we broadcast the transaction to the network and
a nice place to extract the change from the transaction.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
For the permfail tests the sendpay call is supposed to fail, so this
was printing stacktraces upon success. Running in futures captures any
thrown exceptions and rethrows them when calling `result()`, in our
case we just ignore them.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
So far we were always using the deadline in the announcements, that's
obviously not good, so this introduces the parameter as per spec.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We weren't killing it. Eventually it would die, and peer_owner_finished()
would access subd->peer->owner, but that peer was freed already.
Closes: #261
Reported-by: Christian Decker <decker.christian@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reproduce the next bug, I had to ensure that one node keeps thinking it's
disconnected, then the other node reconnects, then the first node realizes
it's disconnected.
This code does that, adding a '0' dev-disconnect modifier. That means
we fork off a process which (due to pipebuf) will accept a little
data, but when the dev_disconnect file is truncated (a hacky, but
effective, signalling mechanism) will exit, as if the socket finally
realized it's not connected any more.
The python tests hang waiting for the daemon to terminate if you leave
the blackhole around; to give a clue as to what's happening in this
case I moved the log dump to before killing the daemon.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
jl777 reported a crash when we try to pay past reserve. Fix that (and
a whole class of related bugs) and add tests.
In test_lightning.py I had to make non-async path for sendpay() non-threaded
to get the exception passed through for testing.
Closes: #236
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was hoping to defer HTLC updates until we actually store HTLCs, but
we need to flush to DB whenever balances update as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the big one, and it's completely anticlimactic: it loads all
channels that have reached opening and are not marked as
closingd_complete into memory, that's it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I was hoping to trigger on more things from the bitcoind process, but
stuff like mempool is hard to trigger on. Reducing to info so we can
work a bit easier with pdb and the log becomes less noisy.
We'll need this for testing nodes going down during payment.
However, there's no good way to silence the threads that I can tell,
so we get a nasty backtrace from it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tracked down a bug, and couldn't figure out why valgrind wasn't
finding it.
From man valgrind:
--log-file=<filename>
Specifies that Valgrind should send all of its messages to the
specified file. If the file name is empty, it causes an abort.
There are three special format specifiers that can be used in the
file name.
%p is replaced with the current process ID. This is very useful for
program that invoke multiple processes. WARNING: If you use
--trace-children=yes and your program invokes multiple processes OR
your program forks without calling exec afterwards, and you don't
use this specifier (or the %q specifier below), the Valgrind output
from all those processes will go into one file, possibly jumbled
up, and possibly incomplete.
"possibly incomplete" indeed!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We weren't registering reconnecting peers for broadcasts. Just
starting a timer is enough. Also added an integration test to check
that the gossip sync is being resumed.
This is a transitional state, while we're waiting to see the
closing tx onchain (which is To Be Implemented).
The simplest way to do re-transmission is to re-use closingd, and just
disallow any updates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually don't need to transition if we're reconnecting, and logic
to go to CHANNELD_NORMAL was wrong: we checked that we'd seen funding tx
locked, but not that we'd received a msg from the remote peer.
We need to fix the tests now we no longer double-transition, too.
Fixes: #188
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we drop an HTLC_ADD packet, sometimes the commit timer fires
before we try to read from the fd. In this case, the payment is
considered committed and we don't fail.
We need manual commit to work around this, and also we'd need to do
the pay command asynchronously from python because it will block.
That's a bit out of scope for now, so just handle either way.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the scriptpubkey to send until after a commitment_signed (or,
in the corner case, if there's no pending commitment). When we
receive a shutdown from the peer, we pass it up to the master.
It's up to the master not to add any more HTLCs, which works because
we move from CHANNELD_NORMAL to CHANNELD_SHUTTING_DOWN.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently it's fairly ad-hoc, but we need to tell it to channeld when
it restarts, so we define it as the non-HTLC balance.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When adding their HTLCs, it needs all the information. When failing,
it needs the id as key and the failure reason. When fulfilling, it
needs the id and payment preimage.
It also needs to know when we have received an revoke_and_ack or a
commitment_signed, to place in the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I have a test which waits for multiple occurrences of the same string,
but doesn't want them to overlap. Make wait_for_log() do the right thing,
so that it only looks for log entries since the last wait_for_log.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On my laptop under load, 5 seconds was no longer enough for legacy.
But this breaks async (they all see mempool increase, and fire
prematurely), so stop doing that.
I can't get this test to work at all, in fact, without this patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I actually hit this very hard to reproduce race: if we haven't process
the channeld message when block #6 comes in, we won't send the gossip
message. We wait for logs, but don't generate new blocks, and timeout
on l1.daemon.wait_for_log('peer_out WIRE_ANNOUNCEMENT_SIGNATURES').
The solution, which also tests that we don't send announcement signatures
immediately, is to generate a single block, wait for CHANNELD_NORMAL,
then (in gossip tests), generate 5 more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We explicitly assert what state we're coming from, to make transitions
clearer.
2. Every transition has a state, even between owners while waiting for HSM.
3. Explictly step though getting the HSM signature on the funding tx
before starting channeld, rather than doing it in parallel: makes
states clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to do this on every connection, whether reconnecting or not,
so it makes sense for the handshake daemon to handle it and return
the feature fields.
Longer term I'm considering having the handshake daemon handle the
listening and connecting, and simply hand the fds back once the peers
are ready.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently create a peer struct, then complete handshake to find out
who it is. This means we have a half-formed peer, and worse: if it's
a reconnect we get two peers the same.
Add an explicit 'struct connection' for the handshake phase, and
construct a 'struct peer' once that's done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
eg:
test_routing_gossip (__main__.LightningDTests) ... ERROR
======================================================================
ERROR: test_routing_gossip (__main__.LightningDTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "tests/test_lightningd.py", line 150, in tearDown
err_count += self.printValgrindErrors(node)
File "tests/test_lightningd.py", line 137, in printValgrindErrors
errors, fname = self.getValgrindErrors(node)
File "tests/test_lightningd.py", line 132, in getValgrindErrors
with open(error_file, 'r') as f:
FileNotFoundError: [Errno 2] No such file or directory: '/tmp/lightning-l106st0a/test_routing_gossip/lightning-1/valgrind-errors'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Under stress, the tests can mine blocks too soon, and the funding never
locks. This gives more of a chance, at least.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I couldn't actually figure out how to just dump them on error, so I
dump all the time. When running 3 lightningd + bitcoind, this separates
the logs nicely.
TODO: We should delete the directories on success!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
But it breaks:
test_forward (__main__.LightningDTests) ... lightningd_channel: Computed MAC does not match expected MAC, the message was modified.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly switching from the old include to the new include and adjusting
the actual size of the onion packet. It also moves `channel.c` to use
`struct hop_data`.
It introduces a dummy next hop in `channel.c` that will be replaced in
the next commit.
This moves all the non-legacy blackbox testing into python.
Before:
real 10m18.385s
After:
real 9m54.877s
Note that this doesn't valgrind the subdaemons: that patch seems to cause
some issues in the python framework which I am still chasing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Running long integration tests could result in `bitcoind` dropping the
connection inbetween calls, and since python-bitcoinlib does not
reconnect and/or retry, all subsequent tests would fail as well. This
patch switches to throwaway connections, each serving just one
request. It's easier than to reach into the bitcoinlib to reconnect
and reauth, but comes with some overhead, but I think it's acceptable
for the few bitcoin calls we actually perform.
By looking for 'Done loading' in the log output we should actually be
called after `SetRPCWarmupFinished` in bitcoind. Only then is it safe
to make RPC calls. This resulted in the test suite being a bit flaky.
