Rather than a generic "add member", provide two routines: one which
doesn't quote, and one which does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's a deprecation, we simply ignore one, rather than properly
checking they match etc.
Fixes: #5386
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The gossip_store version was bumbed to 10 in PR #5239 and #5375 has
apparently not been rebased on top of that when it was merged, causing
the `run-gossmap_canned` test to fail when parsing the v9 gossip
store.
Changelog-None
This will be used to decouple internal use of gossip from what is
passed to gossip peers. Updates GOSSIP_STORE_VERION to 10.
Changelog-Changed: gossip_store updated to version 10.
Usually we won't see this, since private is deleted. But we could
have already read the private channel before that. Handle it properly.
(Tested by removing the gossip_store deletion code and making sure
this worked).
We have to fix up the test, which announces a channel twice!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thanks to @zerofeerouting for another report.
"desc" here is the sanitized message, eg:
"ERROR error channel 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef: internal error"
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to 0.11.0 we had cases where we would treat errors
as warnings: regretfully, this is still needed. This message
in particular has been widely reported, and it now causes
channel force closes.
Downgrade and log. I did insert some snarky log message earlier,
but hey, I'm sure CLN has done worse things to our peers!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: treat LND "internal error" as warnings, not force close events (as we did in v0.10).
@whitslack complained of large CPU usage by connectd at startup;
I ran perf record on connectd on my machine (which sees a little spike, only)
and I see the cost of reading and discarding the entries:
```
- 95.52% 5.24% lightning_conne lightning_connectd [.] gossip_store_next
- 90.28% gossip_store_next
+ 40.27% tal_alloc_arr_
+ 22.78% tal_free
+ 11.74% crc32c
+ 9.32% fromwire_peektype
+ 4.10% __libc_pread64 (inlined)
1.70% be32_to_cpu
```
Much of this is caused by the search for our own gossip: keeping this separately
would be even better, but this fix is minimal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: connectd: reduce initial CPU load when connecting to peers.
This changes many fields: in non-deprecated mode, they're now raw integers.
This was always the intention, but the transition was never completed.
Suggested-By: @ShahanaFarooqui
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: "_msat" fields can be raw numbers, not "123msat" strings (please handle both!)
Changelog-Deprecated: JSON-RPC: "_msat" fields as "123msat" strings (will be only numbers)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
This likely lead to a number of false errors when attempting to
route. We deemed a channel to be unusable as soon as either direction
isn't usable. This is bad since it excludes not only zeroconf
channels (which have different scids for the two directions), but it
also excludes any channel that we haven't seen an update from
yet. This was likely introduced when attemting to exclude nodes that
haven't sent a disable, but their peer has, but this is not necessary
as the unresponsive node would be marked as isolated by all its peers,
so we don't need to artificially mark a channel direction as disabled
when really we can't even enter the node to traverse the channel in
that direction.
Changelog-Fixed: routing: Fixed an issue where we would exclude the entire channel if either direction was disabled, or we hadn't seen an update yet.
After this, we can exactly reproduce the vectors (in DEVELOPER mode).
1. Move payment_metadata position to match test vector.
2. Create flag to suppress `c` field production.
3. Some vectors put secret before payment_hash, hack that in.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this (send warnings) in almost all cases anyway, so mainly this
is a textual update, but there are some changes:
1. Send ERROR not WARNING if they send a malformed commitment secret.
2. Send WARNING not ERROR if they get the shutdown_scriptpubkey wrong (vs upfront)
3. Send WARNING not ERROR if they send a bad shutdown_scriptpubkey (e.g. p2pkh in future)
4. Rename some vars 'err' to 'warn' to make it clear we send a warning.
This means test_option_upfront_shutdown_script can be made reliable, too,
and it now warns and doesn't automatically close channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
The signatures on the new examples are sometimes different from what we produce though?
They're valid, however.
And one example has an unneeded feature 5-bit; it's not *wrong*, but
it's not optimal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Partial revert of 43a833e405
"lightningd: remove support for legacy onion format."; we restore the
ability to decode legacy onions for forwarding, but not to generate them.
(We don't accept them properly since making payment_secret compulsory
anyway, so no real change there!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: ... but we still forward legacy HTLC onions for now.
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
