This is a best effort attempt to skip connection attempts if we detect a broken
ISP resolver. A broken ISP resolver is a resolver that will replace NXDOMAIN
replies with a dummy response. This is best effort in that it'll only detect a
single fixed dummy reply, it'll check only on startup, and will not detect if we
switched networks. It should be good enough for most cases, and in the worst
case it will result in a connection attempt that does not complete.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Glenn Willen <@gwillen>
Cut & paste means we sometimes sent NULL:
```
2018-06-15T00:13:51.908Z lightningd(23653): lightning_closingd-03864ef025fde8fb587d989186ce6a4a186895ee44a926bfc370e2c366597a3f8f chan #436: Gossipd gave us bad send_gossip message 0bc80000
```
Fixes: #1581
Reported-by: @Xian001
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In this case, local and remote are *both* NULL; so if someone tries to
send a packet with take(), we need to free it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I think this is what is causing #1536: getting disconnected causes gossipd to
attempt to reach the peer again, unconditionally setting the flag to tell the
master. At the same time the master also issues a reaching command (which is
allowed since it is its first), but then it clashes on the already set
flag. Setting this flag only when the master actually needs to be told should
fix this.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This makes the exposed interface much smaller, cleaner and will allow us to just
replay gossip messages from the broadcast.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This lets detect if a node announce preceeds a channel announce once we
delete the node announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we currently only (ab)use it to send everything, we need a way to
generate boutique queries for testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a function called 'wake_pkt_out' which is really 'start
gossiping', so rename it to 'wake_gossip_out'.
In addition, it's fired both on a timer, and in response to our first
gossip_timestamp_filter, which leads to very confusing (though,
technically, not incorrect) behavior.
Keep a single timer at all times, which now doubles as the flag to
indicating we're syncing right now. Set it once we're done syncing
gossip.
Technically this means we got from once-every-60-seconds to
quiet-for-60-seconds-between-gossip, but that's OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And initialize filter (to "never") when we negotiated LOCAL_GOSSIP_QUERIES,
and send initial filter message.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the same system as for gossip: we trickle out replies when we're
otherwise idle.
As we trickle out replies to query_short_channel_ids, we remember the
pubkeys of nodes we mention. At the end, we sort and uniquify, and
then send any node_announcements we have for those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the same system as for gossip: we trickle out replies when we're
otherwise idle.
This is minimal infrastructure: we don't actually process the
query_short_channel_ids message yet, nor do we append node
announcements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
handle_pending_cannouncement might not actually add the announcment,
as it could be waiting for a channel_update. We need to wait for
the actual announcement before considering announcing our node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't have any connection yet, so how could they be active? Disable both
sides to avoid trying to route through them or telling others to use them as
`contact_points` in invoices.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We're telling gossipd about disconnections anyway, so let's just use that signal
to disable both sides of the channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was failing some of our integration tests, i.e., the ones closing a channel
and not waiting for sigexchange. The remote node would often not be quick enough
to send us its disabling channel_update, and hence we'd still remember the
incoming direction. That could then be sent out as part of an invoice, and fail
subsequently. So just set both directions to be disabled and let the onchain
spend clean up once it happens.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This resolves the problem where both channeld and gossipd can generate
updates, and they can have the same timestamp. gossipd is always able
to generate them, so can ensure timestamp moves forward.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@cdecker points out that in test_forward, where we manually create a route,
we get an error back which contains an update for an unknown channel.
We should still note this, but it's not an error for testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note: this will break the gossip_store if they have current channels,
but it will fail to parse and be discarded.
Have local_add_channel do just that: the update is logically separate
and can be sent separately.
This removes the ugly 'bool add_to_store' flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tor wasn't actually working for me to connect to anything, but it worked
for 'ssh -D' testing.
Note that the resulting 'netaddr' is a bit weird, but I guess it's honest.
$ ./cli/lightning-cli connect 021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b
{
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b"
}
$ ./cli/lightning-cli listpeers
{
"peers": [
{
"state": "GOSSIPING",
"id": "021f2cbffc4045ca2d70678ecf8ed75e488290874c9da38074f6d378248337062b",
"netaddr": [
"ln1qg0je0lugpzu5ttsv78vlrkhteyg9yy8fjw68qr57mfhsfyrxurzkq522ah.lseed.bitcoinstats.com:9735"
],
"connected": true,
"owner": "lightning_gossipd"
}
]
}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use a wireaddr_internal directly (which is what we want).
Also, don't hardcode 9735, use DEFAULT_PORT internally in
seed_resolve_addr().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously it converted the wireaddr to a string internally: to support
unresolved names we need that done externally.
We actually tell the SOCKS5 proxy to do a domain lookup already, even
though we give use IP/IPv6 address, so this change is sufficient to
support connect-by-name.
Note replacement of assert() with an explicit case statement, which
has the benefit that the compiler complains when we add new
ADDR_INTERNAL types.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is useful for the next patch, where we want to hand the unresolved
name through to the proxy.
This also addresses @Saibato's worry that we still called getaddrinfo()
(with the AI_NUMERICHOST option) even if we didn't want a lookup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not all of them, but it's really about using the SOCKS proxy rather than
really using Tor at this level.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We assert() that it's set by one of the branches (it should be!) but
if we don't hit one it's uninitialized, not NULL.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. If we have a channel_announcement, the channel is public, otherwise
it's not. Not all channels are public, as they can be local: those
have a NULL channel_announcement.
2. If we don't have a channel_update, we know nothing about that half
of the channel, and no other fields are valid.
3. We can tell if a half channel is disabled by the flags field directly.
Note that we never send halfchannels without an update over
gossip_getchannels_reply so that marshalling/unmarshalling can be
vastly simplified.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make the update/announce messages own the element in the broadcast map
not the other way around.
Then we keep a pointer to the message, and when we free it
(eg. channel closed, update replaces it), it gets freed from the
broadcast map automatically.
The result is much nicer!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
