This means we replace p->cmd with an auxillary command after we've
finished, so we have a valid command to use.
It also means we weave `struct command_result` returns back through
all the callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The `pay` plugin, as well as other plugins making use of the tree-pay
executor, will now emit their observations as they see them. The
notifications are sent on the `channel_hint_updated` topic, and any
subscriber will get them.
We also added a `timestamp` to the `struct channel_hint`, as these
observations now outlive the `pay` call, and have to be attenuated /
relaxed as they age, until we can eliminate them completely (when the
restriction is equal to the structural information gathered from the
gossip).
Changelog-Added: pay: Payments now emit `channel_hint_updated` notification to share inferred balances and observations across multiple payments.
This allows us to directly returnan error code based on where we
decided to abort, rather than attemtping to infer it from the parts.
Changelog-Added: pay: The pay plugin now returns better error codes
Changelog-Added: Protocol: pay can now pay to bolt12 invoices if entry to blinded hop is specified as a short_channel_id (rather than node id).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For bolt12, we have blinded paths so we route to the head of the blinded
path, which may not be the same as the final payment destination.
This matters mainly for detecting self-pay.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec has moved a bit here: the `outgoing_cltv_value` in the final onion
is basically the blockheight now (plus the 1 block delta we give ourselves).
Also, we were doubling ours, since p->min_final_cltv_expiry was already set
to p->blindedpay->cltv_expiry_delta above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The `chainlag` is defined as the positive difference between the
height of the last block processed by the node and the best height
known by the bitcoin backend. The chainlag is positive when we are
still catching up with the blockchain, and `0` otherwise.
The `chainlag` is used as an additional offset to the CLTV values when
sending payments, allowing payments to be sent even before the chain
sync completes.
So far we would call `preapproveinvoice` once for each payment split,
i.e., at least once per HTLC, and potentially more often. There is no
point in doing so repeatedly, and especially in remote signer setup
this is actually counterproductive due to the additional roundtrips.
Changelog-Changed pay: Improved performance by removing repeated `preapproveinvoice` calls
This is the simplest solution, not the best, but there's significant risk in try to remove the "we have a path" assumption in the code pay code.
Includes removing a `tal_steal` which was incorrect: the buffer has the same lifetime as the plugin, so if we steal it then things get messy when we free the struct payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `pay` will now pay your own invoices if you try.
"BOLT 4: Remove legacy format, make var_onion_optin compulsory."
This also renamed the redundant "tlv_payload" to "payload", so we
replace "tlv_tlv_payload" with "tlv_payload" everyhere!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The htlc_budget only exists iff the hint is a 'local' one; we were
failing to write to the htlc_budget field for non-local cases.
To avoid this, we make `local` into a struct that contains the fields
that pertain to local-only payments (in this case, `htlc_budget`).
Valgrind error file: valgrind-errors.1813487
==1813487== Conditional jump or move depends on uninitialised value(s)
==1813487== at 0x4A9C958: __vfprintf_internal (vfprintf-internal.c:1687)
==1813487== by 0x4AB0F99: __vsnprintf_internal (vsnprintf.c:114)
==1813487== by 0x1D2EF9: do_vfmt (str.c:66)
==1813487== by 0x1D3006: tal_vfmt_ (str.c:92)
==1813487== by 0x11A60A: paymod_log (libplugin-pay.c:167)
==1813487== by 0x11B749: payment_chanhints_apply_route (libplugin-pay.c:534)
==1813487== by 0x11EB36: payment_compute_onion_payloads (libplugin-pay.c:1707)
==1813487== by 0x12000F: payment_continue (libplugin-pay.c:2135)
==1813487== by 0x1245B9: adaptive_splitter_cb (libplugin-pay.c:3800)
==1813487== by 0x11FFB6: payment_continue (libplugin-pay.c:2123)
==1813487== by 0x1206BC: retry_step_cb (libplugin-pay.c:2301)
==1813487== by 0x11FFB6: payment_continue (libplugin-pay.c:2123)
==1813487==
{
<insert_a_suppression_name_here>
Memcheck:Cond
fun:__vfprintf_internal
fun:__vsnprintf_internal
fun:do_vfmt
fun:tal_vfmt_
fun:paymod_log
fun:payment_chanhints_apply_route
fun:payment_compute_onion_payloads
fun:payment_continue
fun:adaptive_splitter_cb
fun:payment_continue
fun:retry_step_cb
[sesh] 0:[tmux]*Z
Suggested-By: @nothingmuch
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
We simply take the first one, and route to the start of that. Then we
append the blinded path to the onion construction.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were setting it on the root, but that doesn't get handed to
sendpay. Our schema doesn't *require* bolt11, either, so this was
missed (there could be a *bolt12* instead).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `listpays` always includes `bolt11` or `bolt12` field.
As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
1. The dijkstra can be temporary, doesn't need to last as long as pay cmd.
2. We fail multiple times in several places, so don't leak old failreason.
3. Make payments findable by our memleak detector.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It was really different from the way we decide the overall state of a
`pay` command's output. Now we use a more similar state decision,
based on collecting all states and checking them at the end to
determine the outcome.
The main responsibility of this new function is to mark a payment
process as terminated and set a reasonable error message, that will be
displayed to the caller. We also skip the remaining modifiers since
they might end up clobbering the message.
When we support bolt12, this won't exist. We only need min_final_cltv_expiry,
routes and features, so put them into struct payment explicitly.
We move the default final ctlv out to the caller, too, which is clearer.
e.g. keysend was using this value, but it was hard to tell.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a new state `PAYMENT_STEP_RETRY_GETROUTE` which is used to
retry just that one step, without spawning a completely new
attempt. It's a new state so that modifiers do not act on it twice.
Changelog-Fixed: pay: Improved the performance of the `pay` command considerably by avoiding conflicting changes to our local network view.
This is a fairly direct translation. Even so, it should be faster in
most cases, and and we can do more sophisticated things if we want.
This also handles disabled channels better.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: plugins: `pay` will now try disabled channels as a last resort.
Fixes: #3926
(probably)
Changelog-Fixed: pay: Also limit the number of splits if the payee seems to have a low number of channels that can enter it, given the max-concurrent-htlcs limit.
As revealed by the failure of tests in #3936, where we ended up trying
to send a partial payment using legacy style, we are not handling
style properly.
1. BOLT9 has features, so we can *know* that the destination supports
MPP. We may not have seen a node_announcement.
2. We can't assume that nodes inside routehints support TLV.
3. We can't assume direct peers support TLV.
The keysend code tried to fix this up, so I'm not sure that this caused
the issue in #3968, though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: `pay` will now make reliable multi-part payments to nodes it doesn't have a node_announcement for.
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Arguably a low-priority bug since no current node ever generates routehints longer
than one hop.
However, it is possible as an edge case, if the destination is directly accessible
*and* supports multiple channels, that we route through the destination, one of the
*other* channels it has not in the routehint, to the entry point, and then through
the routehint.
This change removes the risk of the above edge case.
Changelog-None: arguably a low-priority bug.
