Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
This is needed when we know we're *opening* an anchor channel, to
override the "do we already have an anchor channel open?" logic.
Also, document the nonwrapped arg added in v23.02.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundpsbt` and `utxopsbt` new parameter `opening_anchor_channel` so lightningd knowns it needs emergency reserve for anchors.
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
Changelog-Added: JSON-RPC: `feerates`: added `floor` field for current minimum feerate bitcoind will accept
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Drop try_get_feerate() in favor of explicit feerate_for_deadline() and
smoothed_feerate_for_deadline().
This shows us everywhere we deal with old-style feerates by names.
`delayed_to_us` and `htlc_resolution` will be moving to dynamic fees,
so deprecate those.
Note that "penalty" is still used for generating penalty txs for
watchtowers, and "unilateral_close" still used until we get zero-fee
anchors.
Changelog-Added: JSON-RPC: `feerates` `estimates` array shows fee estimates by blockcount from underlying plugin (usually *bcli*).
Changelog-Changed: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) value *slow* is now 100 block-estimate, not half of 100-block estimate.
Changelog-Deprecated: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) expressed as, "delayed_to_us", "htlc_resolution", "max_acceptable" or "min_acceptable". Use explicit block counts or *slow*/*normal*/*urgent*/*minimum*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: msggen: The generated interfaces `cln-rpc` anc `cln-grpc` can now work with a range of versions rather than having to match the CLN version
It's a core concept in the spec which isn't directly exposed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listchannels` added a `direction` field (0 or 1) as per gossip specification.
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
Changelog-Changed: JSON-RPC: `listfunds` now lists coinbase outputs as 'immature' until they're spendable
Changelog-Changed: JSON-RPC: UTXOs aren't spendable while immature
We have to allow them (as otherwise `fees_collected_msat` in getinfo breaks),
but it means that actually, in_htlc_id might be missing in listforwards
(also, out_htlc_id might be missing, which we didn't catch before).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5628
And document that we never know payment_hash.
Changelog-Added: JSON-RPC: `listforwards` now shows `in_htlc_id` and `out_htlc_id`
Changelog-Changed: JSON-RPC: `listforwards` now never shows `payment_hash`; use `listhtlcs`.
Changelog-Added: JSON-RPC: `fundchannel`, `multifundchannel` and `fundchannel_start` now accept a `reserve` parameter to indicate the absolute reserve to impose on the peer.
First, how we record "our_funds" and then apply pushes vs lease_fees
(for liquidity ad buys/sales) was exactly opposite.
For pushes we were reporting the total funded into the channel, with the
push representing how much we'd later moved to the peer.
For lease_fees we were rerporting the total in the channel, with the
push representing how much was already moved to the peer.
We fix this (from a view perspective) by re-adding lease fees to what's
reported in the channel funding totals. Since this is now new behavior
(for leased channel values), we added new fields so we can take the old
field names thru a deprecation cycle.
We also make it possible to differentiate btw a push and a lease_fee
(before they were all the same), by adding to new fields to `listpeers`:
`fee_paid_msat` and `fee_rcvd_msat`.
This allows us to avoid math in the bookkeeper, instead we just pick
the numbers out directly and record them.
Fixes#5472
Changelog-Added: JSON-RPC: `listpeers` now has a few new fields for `funding` (`remote_funds_msat`, `local_funds_msat`, `fee_paid_msat`, `fee_rcvd_msat`).
Changelog-Deprecated: JSON-RPC: `listpeers`.`funded` fields `local_msat` and `remote_msat` are now deprecated.
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
This is likely inherited from bitcoind, and a bit awkward for us, so
we parse it into a classic struct, but serialize it back into the
bitcoind format when talking to the RPC.
We are inferring the field numbers on the fly, which isn't really
compatible with the way GRPC field numbers work, i.e., they must be
stable while the IDL file evolves. So far when a field was added in
the middle of a struct or removed all subsequent fields would get
renumbered, essentially breaking any client that was using the old
scheme.
We now add a meta file `.msggen.json` that keeps track of the numbers
assigned so far, so they can be reused, and new ones can be generated
not to conflict with existing ones. This file is intentionally kept
generic, so other generators can add more information that has to be
managed across runs.
Changelog-None
