The `pay` plugin, as well as other plugins making use of the tree-pay
executor, will now emit their observations as they see them. The
notifications are sent on the `channel_hint_updated` topic, and any
subscriber will get them.
We also added a `timestamp` to the `struct channel_hint`, as these
observations now outlive the `pay` call, and have to be attenuated /
relaxed as they age, until we can eliminate them completely (when the
restriction is equal to the structural information gathered from the
gossip).
Changelog-Added: pay: Payments now emit `channel_hint_updated` notification to share inferred balances and observations across multiple payments.
This avoids globals (and means memleak traverses the variables!): we
only change over the test plugin though, to avoid unnecessary churn.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Things are often equivalent but different types:
1. u8 arrays in libwally.
2. sha256
3. Secrets derived via sha256
4. txids
Rather than open-coding a BUILD_ASSERT & memcpy, create a macro to do it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: pay can now pay to bolt12 invoices if entry to blinded hop is specified as a short_channel_id (rather than node id).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Ideally, we would be able to submit a payment exactly as an incoming
HTLC would, but our forwarding and decoding logic is currently very
much tied to the HTLC. It would be wonderful to detach that and
have an "injectonion" interface which was unwrapped like any other
(see "injectonionmessage") which would handle self-pay without any
special paths.
Since I'm not prepared to rewrite that all now, instead we use an
interface to decrypt the first hop if it's us, and use the remainder
of the blinded path.
Changelog-Fixed: plugins: pay can now pay a bolt12 invoice even if we, ourselves, are the head of the blinded path within it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For bolt12, we have blinded paths so we route to the head of the blinded
path, which may not be the same as the final payment destination.
This matters mainly for detecting self-pay.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we can see the values in listconfigs, even if we haven't set
them yet.
In particular, we now see the following:
* autoclean-cycle.value_int=3600
* bitcoin-rpcclienttimeout.value_int=60
* bitcoin-retry-timeout.value_int=60
* funder-max-their-funding.value_str=4294967295sat
* funder-per-channel-min.value_str=10000sat
* funder-reserve-tank.value_str=0sat
* funder-fund-probability.value_int=100
Changelog-Changed: plugins: libplugin now shows plugin option default values (where they're non-trivial)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec has moved a bit here: the `outgoing_cltv_value` in the final onion
is basically the blockheight now (plus the 1 block delta we give ourselves).
Also, we were doubling ours, since p->min_final_cltv_expiry was already set
to p->blindedpay->cltv_expiry_delta above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't actually support it yet, but this threads through the type change,
puts it in "decode" etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And deprecate the --max-locktime-blocks which allows them to set it.
Hilariously, the spec misspells CLTV as CTLV at one point, so we work around it for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a u64, we should pass by copy. This is a big sweeping change,
but mainly mechanical (change one, compile, fix breakage, repeat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This has the benefit of being shorter, as well as more reliable (you
will get a link error if we can't print it, not a runtime one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
a.k.a. "Pay with a friend!".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has a new parameter `partial_msat` to only pay part of an invoice (someone else presumably will pay the rest at the same time!)
Suggested-by: Calle
This is the simplest solution, not the best, but there's significant risk in try to remove the "we have a path" assumption in the code pay code.
Includes removing a `tal_steal` which was incorrect: the buffer has the same lifetime as the plugin, so if we steal it then things get messy when we free the struct payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `pay` will now pay your own invoices if you try.
The presplitter modifier would split a payment before trying the first
attempt based on some common sizes. Its goal was to have smaller parts
in flight over different paths, in order to make it more difficult for
a forwarding node to learn payment amount. However it was causing some
issues for direct payments, and estimates on spendable amounts which
considers only the first HTLC being added, but presplitter would
always cause multiple HTLCs to be kicked off, causing the estimate to
be off.
Removing the presplitter fixes this, making draining channels easier,
and worse success rates, due to more HTLCs in flight directly
impacting the changes of getting stuck.
Changelog-Removed: pay: `pay` no longer splits based on common size, as it was causing issues in various scenarios.
Previously, our code checked for the presence of the `lightning:`
prefix while decoding a bolt11 string. Although this prefix is valid
and accepted by the core lightning pay command, it was causing issues
with how we managed invoices. Specifically, we were skipping the prefix
when creating a copy of the invoice string and storing the raw invoice
(including the prefix) in the database, which caused inconsistencies
in the user experience.
To address this issue, we need to strip the `lightning:` prefix before
calling each core lightning command. In addition, we should
modify the invstring inside the db with the canonical one.
This commit fixes the issue by stripping the `lightning:` prefix
from the `listsendpays` function, which will improve the
user experience and ensure consistency in our invoice management (see
next commit).
Reported-by: @johngribbin
Link: ElementsProject#6207
Fixes: debbdc0
Changelog-Fixes: trim the `lightning:` prefix from invoice everywhere.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Since we didn't hash the descriptions properly (see previous commit), we
cannot immediately deprecate omitting the descriptions (since you'd
have to omit them for backwards compat!).
And move the "must have description or hash" test into bolt11.c core.
Changelog-Deprecated: `pay` has *undeprecated* paying a description-hash invoice without providing the description.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we need to push off requring this for another full deprecation cycle!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `pay` and `decodepay` with description now correctly handle JSON escapes (e.g " inside description)
This integrates them with configvars properly: they almost "just work"
in listconfigs now, and we don't put them in a special sub-object
under their plugin.
Unfortunately, this means `listconfigs` now has a loose schema: any
plugin can add something to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: reloaded plugins get passed any vars from configuration files.
Changelog-Deprecated: Config: boolean plugin options set to `1` or `0` (use `true` and `false` like non-plugin options).
It's still deprecated: we need the description since
1. This information is useful for any validation we want to do, such as
the HSM, or runes.
2. We want this information in listpays so we can tell what we actually paid.
3. In general, we should never sign commitments to things we don't have!
I expect to have this information about payments *whatever the frontend* is,
which is why we deprecated (and then removed) this unintended use. The spec
is pretty clear on this:
BOLT #11:
```
A reader:
...
- MUST check that the SHA2 256-bit hash in the `h` field exactly matches the hashed
description.
```
However, neither BTCPayServer nor lnbits updated despite the long deprecation
period, so revert 2afe7a1856.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Deprecated v0.11.0.
Changelog-Removed: JSON-RPC: `pay` for a bolt11 which uses a `description_hash`, without setting `description` (deprecated v0.11.0).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We simply take the first one, and route to the start of that. Then we
append the blinded path to the onion construction.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
This is what we do in lightningd, which makes memleak much more forgiving:
you can hang temporaries off cmd without getting reports of leaks (also
when send_outreq called).
We remove all the notleak() calls in plugins which worked around this!
And avoid multiple notleak labels, since both send_outreq() and
command_still_pending() can be called multiple times.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The completion of a successful payment is defined as the first
completion of a successful part, hence we just collect the minimum
completion time of successes.
Changelog-Added: JSON-RPC: `pay` and `listpays` now lists the completion time.
