This gives a nice way to ensure your secret is the correct one.
Also, we don't need to suppress VALGRIND for this test, now the output
races are fixed.
Changelog-Added: `hsmtool`: new command `checkhsm` to check BIP39 passphrase against hsm_secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some tests need to inspect it, but most don't, and I suspect I'm missing some
error messages due to this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If you get the wrong hsm_secret, your node_id will change, and
peers won't know who you are, bitcoind will reject your transaction
signatures, and other madness.
Catch this as soon as it happens, by storing our node_id in the db.
Suggested-by: @cdecker, @fiatjaf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Config: `lightningd` will refuse to start with the wrong node_id (i.e. hsm_secret changes).
Some flakes are caused by weird races in this code. Plus, if we
get things to write straight to files, we might see things in
there on post-mortem which happen after the python runner exits.
It's a bit less efficient, but much simpler. Let's see if it helps!
Some tests need a rework now, since we don't get a failure (except
eventual timeout), but they're simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Over time, it has cost us more developer cycles than it has gained.
It has hidden intermittant bugs, and allowed cruft to accumulate:
when we eventually tried to figure out what was going wrong, the
actual change which caused it was now stale and forgotten.
This was a particular bane during the connectd rewrite, and I
worked through some issues which had occurred before, but were not
more likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The new msat fields are turned into Millisatoshi, so handle that correctly
too in tests too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `coin_movement` notification: `balance`, `credit`, `debit` and `fees` (use `balance_msat`, `credit_msat`, `debit_msat` and `fees_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Make it always a number; this makes the JSON request specification
simpler. We allowed a number since v0.10.1.
(reserve=True is the default anyway, so usually it can be omitted:
reserve=False becomes reserve=0).
Changelog-Deprecated: JSON-RPC: `fundpsbt`/`utxopsbt` `reserve` must be a number, not bool (for `true` use 72/don't specify, for `false` use 0). Numbers have been allowed since v0.10.1.
Also has to fix up tests.
Changelog-Fixed: cli doesn't required anymore to confirm the password if the `hsm_secret` is already encrypted.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
But this requires a watch-only wallet, and python-bitcoinlib doesn't support
multiple wallets, so we need to unload the original one, but then we need
to generate a block, so that can't generate a new address, so we need
an address arg to generate_block.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The blockheight is zero though, since these aren't included in a block
yet.
We also don't issue an 'external' deposit event if we can tell that the
address you're sending to actually belongs to our wallet (we'll issue a
deposit event when it gets included in a block)
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
The old model of coin movements attempted to compute fees etc and log
amounts, not utxos. This is not as robust, as multi-party opens and dual
funded channels make it hard to account for fees etc correctly.
Instead, we move towards a 'utxo' view of the onchain events. Every
event is either the creation or 'destruction' of a utxo. For cases where
the value of the utxo is not (fully) debited/credited to our account, we
also record the output_value. E.g. channel closings spend a utxo who's
entire value we may not own.
Since we're now tracking UTXOs onchain, we can now do more complex
assertions about the onchain footprint of them. The integration tests
have been updated to now use more 'chain aware' assertions about the
ending state.
Suggested-by: Rusty Russell
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Changed: Support hsm specific error error code in lightning-cli
That's a terrible, terrible idea. (Documentation comes in later patch
which has the schema).
Also, blockheight is a u32, so simplify.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listtransactions` `outputs` `satoshis` field (use `msat` instead).
Test that it roundtrips with the non-stdin way, in order to make sure we
don't introduce a discrepancy between the two.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This reverts commit 2b12cac31e. There is
no need to skip the test in this case, and it seems to simply be an artifact
of CI-debugging hell :)
Changelog-None
We already have this field in reserveinputs and unreserveinputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listfunds` has a new `reserved_to_block` field.
In the case where you want a PSBT and also want the output to be added
as a change address, use `excess_as_change` = true.
Generates a change address to use. If you want to pay the excess
elsewhere, you will have to add separately.
Changelog-Added: JSON-RPC: Add new parameter `excess_as_change` to fundpsbt+utxopsbt
We were sometimes waiting only 5 seconds, which is way too short on a
heavily loaded machine such as CI. Making it 30 seconds and collecting
it in a single place so we can adjust more easily.
Changelog-changed: lightningd: the `--encrypted-hsm` now asks you to confirm your password when first set
Changelog-changed: hsmtool: the `encrypt` now asks you to confirm your password
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Fixes#4302
Changelog-fixed: hsmtool: the `generatehsm` command now generates an appropriately-sized hsm_secret
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This slightly breaks the API, but still accept the input: we just don't
take it into account anymore.
For `dumponchaindescriptors`, we have to still take the old place of the
`network` parameter into account to not entirely break the API.
Changelog-Added: hsmtool: password must now be entered on stdin. Password passed on the command line are discarded.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This test is flaky because the generated PSBT seems to not have the change
output adjusted, or it is missing.
Tracking-Issue: ElementsProject/lightning#3998
fundpsbt / utxopsbt create a (typically) output-less PSBT,
however for elements we require the fees to be encapsulated in an
output.
this patch updates fundpsbt / utxopsbt to add a fee output for elements
transactions. includes test updates.
Fixes#3998
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
Some minor phrasing differences cause test changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: txprepare reservations stay across restarts: use fundpsbt/reservepsbt/unreservepsbt
Changelog-Removed: txprepare `destination` `satoshi` argument form removed (deprecated v0.7.3)
This is an extra safety check for dual funding, where we only want to sign
the inputs we provided!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `signpsbt` takes an optional `signonly` array to limit what inputs to sign.
Required for dual funding where the opener sets it.
Changelog-Added: JSON-RPC: `fundpsbt` takes a new `locktime` parameter
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The modded_psbt is not necessarily invalid:
# Try a modified (invalid) PSBT string
modded_psbt = psbt[:-3] + 'A' + psbt[-3:]
with pytest.raises(RpcError, match=r"should be a PSBT, not"):
> l1.rpc.signpsbt(modded_psbt)
E AssertionError: Pattern 'should be a PSBT, not' not found in 'RPC call failed: method: signpsbt, payload: {'psbt': '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'}, error: {'code': -1, 'message': 'No wallet inputs to sign'}'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
