We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
This attempted to make us re-xmit our own node_announcement at restart,
by moving the node_announcement to the end of the gossip store. But,
as nothing is connected, yet, this had no effect!
We will rexmit it anyway, since it's marked PUSH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Even if we're deferring putting them in the store and broadcasting them,
we tell lightningd so it will use it in any error messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can have an update pending because it's too fast, but
refresh_local_channel is supposed to make sure we're up-to-date, so
force immediate application in that case.
Otherwise, we call update_local_channel at the bottom which frees the
pending update. This can mean that we miss a change in fees, for example.
Changelog-Fixed: errors: Errors returning a `channel_update` no longer return an outdated one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
This overcomes the internal spam filter on updates, which can be useful
if we're actually trying to send through such a node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: always accept channel_updates from errors, even they'd otherwise be rejected as spam.
Fixes: #4300
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
common should not include specific per-daemon files. Turns out this
caused a lot of indirect includes to be exposed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
This is ignored in subdaemons which are per-peer, but very useful for
multi-peer daemons like connectd and gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a better fix than doing it manually, which turned out
to do it in the wrong order (node_announcement followed by
channel_announcement) anyway.
Should fix many "Bad gossip" messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I had a report of a 0.7.2 user whose node hadn't appeared on 1ml. Their
node_announcement wasn't visible to my node, either.
I suspect this is a consequence of recent version reducing the amount of
gossip they send, as well as large nodes increasingly turning off gossip
altogether from some peers (as we do). We should ignore timestamp filters
for our own channels: the easiest way to do this is to push them out
directly from gossipd (other messages are sent via the store).
We change channeld to wrap the local channel_announcements: previously
we just handed it to gossipd as for any other gossip message we received
from our peer. Now gossipd knows to push it out, as it's local.
This interferes with the logic in tests/test_misc.py::test_htlc_send_timeout
which expects the node_announcement message last, so we generalize
that too.
[ Thanks to @trueptolmy for bugfix! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It usually means we're missing something, but there's no way to ask what.
Simply start a broad scid probe.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We eliminate the "need peer" states and instead check if the
random_peer_softref has been cleared.
We can also unify our restart handlers for all these cases; even the
probe_scids case, by giving gossip credit for the scids as they come
in (at a discount, since scids are 8 bytes vs the ~200 bytes for
normal gossip messages).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we have to validate, there can be a delay (and peer might
vanish) between receiving the gossip and actually confirming it, hence
the use of softref.
We will use this information to check that the peers are making progress
as we start asking them for specific information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The only real change is dump_gossip() used to call
maybe_create_next_scid_reply(), but now I've simply renamed
that to maybe_send_query_responses() and we call it directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The first one means we don't discard channels just because we're not
synced, and the second is implied by the spec: don't accept
channel_announcement if the channel isn't 6 deep. Since LND defers in
such cases, we do too (unless it's newer than the current block, in
which case we simply discard). Otherwise there's a risk that a slow
node might discard valid gossip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will let gossipd be more intelligent about gossiping before we're
synced, and also it might know how far behind we are.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If you send a message which simply changes timestamp and signature, we
drop it. You shouldn't be doing that, and the door to ignoring them
was opened by by option_gossip_query_ex, which would allow clients to
ignore updates with the same checksum.
This is more aggressive at reducing spam messages, but we allow refreshes
(to be conservative, we allow them even when 1/2 of the way through the
refresh period).
I dropped the now-unnecessary sleep from test_gossip_pruning, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We've been slack, but it's going to be important for testing
ratelimiting. And it currently has a minor memory leak.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than reaching into data structures, let them register their own
callbacks. This avoids us having to expose "memleak_remove_xxx"
functions, and call them manually.
Under the hood, this is done by having a specially-named tal child of
the thing we want to assist, containing the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`make update-mocks` is usually run in DEVELOPER mode, but then it includes
definitions for functions which aren't declared in non-DEVELOPER mode.
We hacked this in a few places, but it's fragile, and worst, now we
have EXPERIMENTAL_FEATURES as well, it's complex.
Instead, declare developer-only functions (but don't define them).
This is a bit more awkward if you accidentally use one in
non-DEVELOPER code (link error rather than compile error), but makes
autogenerating test mocks much easier.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
