This will only add the discovered `remote_addr` IPs if no other
addresses would be announced. Meaning whenever a public address was
found by autobind or an address was specified via commandline or config,
IP discovery will be disabled.
Addresses: #5305
Note from the author: We could/should also enable IP discovery when we only
have a TOR address (but without --always-use-proxy ofc). This will give
nodes an option to have a bootstrap way to be reached until IP discovery
can do the job in a more stable way.
Changelog-Changed: Only use IP discovery as fallback when no addresses would be announced
This attempted to make us re-xmit our own node_announcement at restart,
by moving the node_announcement to the end of the gossip store. But,
as nothing is connected, yet, this had no effect!
We will rexmit it anyway, since it's marked PUSH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Even if nothing has changed. Note that this is different from simply
re-xmitting the old one, in that it has a different timestamp, so others
will re-xmit it too.
This is a side-effect of reports that node_announcement propagation
through the network is poor:
https://github.com/ElementsProject/lightning/issues/5037
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Protocol: We now refresh our ndoe_announcement every 24 hours, due to propagation issues.
This restores the behaviour prior to `lightningd: use our cached
channel_update for errors instead of asking gossipd.`, where gossipd
would refuse to give us channel_updates for unannounced channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`hc` is never NULL, since it's `hc = &chan->half[direction];`;
we really meant "is it initialized", and valgrind under CI finally
caught it:
```
==69243== Conditional jump or move depends on uninitialised value(s)
==69243== at 0x11C595: handle_local_channel_update (gossip_generation.c:758)
==69243== by 0x115254: recv_req (gossipd.c:986)
==69243== by 0x128F8D: handle_read (daemon_conn.c:31)
==69243== by 0x16BEE1: next_plan (io.c:59)
==69243== by 0x16CAE9: do_plan (io.c:407)
==69243== by 0x16CB2B: io_ready (io.c:417)
==69243== by 0x16EE1E: io_loop (poll.c:453)
==69243== by 0x1154DA: main (gossipd.c:1089)
==69243==
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even if we're deferring putting them in the store and broadcasting them,
we tell lightningd so it will use it in any error messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
local_chan was mainly around so we could "soft" disable channels (and
really disable them once we used the channel_update in an error
message).
Instead we introduce the idea of a "deferred_update": it's either
deferred indefinitely (a peer goes offline, if we need to send it in
an error we'll apply it immediatly), or simply delayed to avoid
spamming everyone.
The resulting rewrite is much clearer, IMHO.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can have an update pending because it's too fast, but
refresh_local_channel is supposed to make sure we're up-to-date, so
force immediate application in that case.
Otherwise, we call update_local_channel at the bottom which frees the
pending update. This can mean that we miss a change in fees, for example.
Changelog-Fixed: errors: Errors returning a `channel_update` no longer return an outdated one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If there's a rate-card for liquidity, we don't know about it until
after startup (the plugin *should* call us at init to tell us what their
current rates are)
This involves removing some fields from the now-misnamed routing.h
datastructures, and various internal messages.
One non-obvious change is to our "keepalive" logic which refreshes
channels every 13 days: instead of using the 'enabled' flag on the
last channel broadcast to decide whether to refresh it, we use the
local connected status directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This overcomes the internal spam filter on updates, which can be useful
if we're actually trying to send through such a node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: always accept channel_updates from errors, even they'd otherwise be rejected as spam.
Fixes: #4300
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
common should not include specific per-daemon files. Turns out this
caused a lot of indirect includes to be exposed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a better fix than doing it manually, which turned out
to do it in the wrong order (node_announcement followed by
channel_announcement) anyway.
Should fix many "Bad gossip" messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I had a report of a 0.7.2 user whose node hadn't appeared on 1ml. Their
node_announcement wasn't visible to my node, either.
I suspect this is a consequence of recent version reducing the amount of
gossip they send, as well as large nodes increasingly turning off gossip
altogether from some peers (as we do). We should ignore timestamp filters
for our own channels: the easiest way to do this is to push them out
directly from gossipd (other messages are sent via the store).
We change channeld to wrap the local channel_announcements: previously
we just handed it to gossipd as for any other gossip message we received
from our peer. Now gossipd knows to push it out, as it's local.
This interferes with the logic in tests/test_misc.py::test_htlc_send_timeout
which expects the node_announcement message last, so we generalize
that too.
[ Thanks to @trueptolmy for bugfix! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It usually means we're missing something, but there's no way to ask what.
Simply start a broad scid probe.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we have to validate, there can be a delay (and peer might
vanish) between receiving the gossip and actually confirming it, hence
the use of softref.
We will use this information to check that the peers are making progress
as we start asking them for specific information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
