And document support for it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `getmanfest` response can contain `nonnumericids` to indicate support for modern string-based JSON request ids.
Changelog-Deprecated: Plugins: numeric JSON request ids: modern ones will be strings (see doc/lightningd-rpc.7.md!)
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise what the hook sees is actually a lie, and if it sets it
we might override it.
The side effect is that we add an explicit "forward_to" field, and
allow hooks to override it. This lets a *hook* control channel
choice explicitly.
Changelod-Added: Plugins: `htlc_accepted_hook` return can specify what channel to forward htlc to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Changelog-Added: Plugins: `htlc_accepted` now exposes the `short_channel_id` for the channel from which that HTLC is coming from and the low-level per-channel HTLC `id`, which are necessary for bridging two different Lightning Networks when MPP is involved.
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The blockheight is zero though, since these aren't included in a block
yet.
We also don't issue an 'external' deposit event if we can tell that the
address you're sending to actually belongs to our wallet (we'll issue a
deposit event when it gets included in a block)
If a coin move concerns an external account, it's really useful to know
which 'internal' account initiated the transfer.
We're about to add a notification for withdrawals, so we can use this to
track wallet pushes to outside addresses
Changelog-Added: JSONRPC: `coin_movement` to 'external' accounts now include an 'originating_account' field
Fire off a snapshot of current account balances (node wallet + every
'active' channel) after we've caught up to the chain tip for the *first*
time (in other words, on start).
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
Get rid of the 'movement_idx', since we replay events now.
Since we're removing a field from the 'coin_movement' event emission, we
bump the version type.
Changelog-Updated: `coin_movements` events have been revamped and are now on version 2.
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4785Fixes: #4883
Changelog-Changed: Plugins: `shutdown` notification is now send when lightningd is almost completely shutdown, RPC calls then fail with error code -5.
I noticed that `wallet/db_postgres.c` never actually calls `db_changes_add`.
PostgreSQL arguably has a better replication system (a PostgreSQL cluster)
than what `db_write` hook can offer, so rather than make `db_write` work on
PostgreSQL, just document that it does not actually work there.
ChangeLog-none
This adds a new hook: onion_message_ourpath for when we know a message
came in via a blinded path we created. The onion_message_blinded hook
is now called for all other messages, since all messages are now
blinded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
When a request comes through, we forward it over to the funder who
uses the currently set policy to figure out how to handle it.
Includes small update to the policy engine which decides whether or not
to fund a request.
Changelog-Experimental: Plugins: `openchannel2` hook now includes optional fields for a channel lease request
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This matters: if we connected, the address is probably usable for future connections.
But if they connected, the port is probably not (but the IP address may be).
Changelog-Added: JSON-RPC: `connect` returns "direction" ("in": they iniatated, or "out": we initiated)
Changelog-Added: plugins: `peer_connected` hook and `connect` notifications have "direction" field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
