"title":"Command to Authorize Remote Peer Access",
"description":[
"The **commando-rune** RPC command creates a base64 string called a *rune* which can be used to access commands on this node. Each *rune* contains a unique id (a number starting at 0), and can have restrictions inside it. Nobody can remove restrictions from a rune: if you try, the rune will be rejected. There is no limit on how many runes you can issue; the node simply decodes and checks them as they are received (we do store them for lightning-commando- listrunes(7) however)."
"If supplied, the restrictions are simple appended to that *rune* (it doesn't need to be a rune belonging to this node). If not supplied, a new *rune* is constructed, with a new unique id."
]
},
"restrictions":{
"description":[
"It can be the string `readonly`, or an array of restrictions.",
"Each restriction is an array of one or more alternatives, such as \"method is listpeers\", or \"method is listpeers OR time is before 2023\"."
],
"oneOf":[
{
"type":"array",
"description":[
"Alternatives use a simple language to examine the command which is being run:",
" * time: the current UNIX time, e.g. \"time<1656759180\".",
" * id: the node_id of the peer, e.g. \"id=024b9a1fa8e006f1e3937f65f66c408e6da8e1ca728ea43222a7381df1cc449605\".",
" * method: the command being run, e.g. \"method=withdraw\".",
" * per: how often the rune can be used, with suffix \"sec\" (default), \"min\", \"hour\", \"day\" or \"msec\", \"usec\" or \"nsec\". e.g. \"per=5sec\".",
" * rate: the rate limit, per minute, e.g. \"rate=60\" is equivalent to \"per=1sec\".",
" * pnum: the number of parameters. e.g. \"pnum<2\".",
" * pnameX: the parameter named X (with any punctuation like `_` removed). e.g. \"pnamedestination=1RustyRX2oai4EYYDpQGWvEL62BBGqN9T\".",
" * parrN: the N'th parameter. e.g. \"parr0=1RustyRX2oai4EYYDpQGWvEL62BBGqN9T\"."
],
"items":{
"type":"array",
"items":{
"type":"string"
}
}
},
{
"type":"string",
"enum":[
"readonly"
],
"description":[
"A rune which allows most *get* and *list* commands, and the *summary* command."
" \"summary\": \"id (of commanding peer) equal to '024b9a1fa8e006f1e3937f65f66c408e6da8e1ca728ea43222a7381df1cc449605'\"",
" },",
" {",
" \"alternatives\": [",
" \"method=listpeers\"",
" ],",
" \"summary\": \"method (of command) equal to 'listpeers'\"",
" },",
" {",
" \"alternatives\": [",
" \"pnum=1\"",
" ],",
" \"summary\": \"pnum (number of command parameters) equal to 1\"",
" },",
" {",
" \"alternatives\": [",
" \"pnameid^024b9a1fa8e006f1e393\",",
" \"parr0^024b9a1fa8e006f1e393\"",
" ],",
" \"summary\": \"pnameid (object parameter 'id') starts with '024b9a1fa8e006f1e393' OR parr0 (array parameter #0) starts with '024b9a1fa8e006f1e393'\"",
" },",
" {",
" \"alternatives\": [",
" \"time<1656920538\"",
" ],",
" \"summary\": \"time (in seconds since 1970) less than 1656920538 (approximately 19 hours 18 minutes from now)\"",
" },",
" {",
" \"alternatives\": [",
" \"rate=2\"",
" ],",
" \"summary\": \"rate (max per minute) equal to 2\"",
" }",
" ],",
" \"valid\": true",
"}",
"```"
],
"sharing_runes":[
"Because anyone can add a restriction to a rune, you can always turn a normal rune into a read-only rune, or restrict access for 30 minutes from the time you give it to someone. Adding restrictions before sharing runes is best practice.",
"",
"If a rune has a ratelimit, any derived rune will have the same id, and thus will compete for that ratelimit. You might want to consider adding a tighter ratelimit to a rune before sharing it, so you will keep the remainder. For example, if you rune has a limit of 60 times per minute, adding a limit of 5 times per minute and handing that rune out means you can still use your original rune 55 times per minute."
"warning_unrestricted_rune":"WARNING: This rune has no restrictions! Anyone who has access to this rune could drain funds from your node. Be careful when giving this to apps that you don't trust. Consider using the restrictions parameter to only allow access to specific rpc methods."
"This allows `listpeers` with 1 argument (`pnum=1`), which is either by name (`pnameid`), or position (`parr0`). We could shorten this in several ways: either allowing only positional or named parameters, or by testing the start of the parameters only. Here's an example which only checks the first 10 bytes of the `listpeers` parameter:"
"Before we give this to our peer, let's add two more restrictions: that it only be usable for 24 hours from now (`time<`), and that it can only be used twice a minute (`rate=2`). `date +%s` can give us the current time in seconds:"
