From 8277779744bc8e073cc3667cb58cc1dc2adf2737 Mon Sep 17 00:00:00 2001
From: MadBo <60196891+Tinus016@users.noreply.github.com>
Date: Thu, 17 Oct 2024 21:28:20 +0200
Subject: [PATCH] Added images / edited small bugs

---
 Hardware-(Rev.-B).md | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/Hardware-(Rev.-B).md b/Hardware-(Rev.-B).md
index c13a31c..37a2a96 100644
--- a/Hardware-(Rev.-B).md
+++ b/Hardware-(Rev.-B).md
@@ -1,3 +1,7 @@
+# Rev.B (With or without front light)
+
+<img src="https://raw.githubusercontent.com/btclock/btclock_v2/refs/heads/main/doc/Rev.B/IMG_3310.jpeg" width="750"/>
+
 # Parts list
 
 | **#** 	| **Part**                           	| **Amount** 	| **Optional** 	| **Remarks**                                          	|
@@ -24,12 +28,19 @@
 
 # Hardware assembly (Place screws and standoffs)
 
-First, place all the 11mm female - female standoffs at the front of the main PCB with the 6mm screws. Keep in mind that at te corners at the back you have to use the 8mm female - male standoffs, this also applies to the, one out-of-the middle 2 at the top of the back.
+<img src="https://raw.githubusercontent.com/btclock/btclock_v2/refs/heads/main/doc/Rev.B/IMG_3314.jpeg" width="750"/>
+<img src="https://raw.githubusercontent.com/btclock/btclock_v2/refs/heads/main/doc/Rev.B/IMG_3313.jpeg" width="750"/>
 
-At the bottom of the, one out-of-the middle 2 you also have to use the 8mm female - male standoffs. 
+First, place all the 11mm female - female standoffs (Orange) at the front of the main PCB with the 6mm screws. Keep in mind that at te top-corners at the back you have to use the 8mm female - male standoffs, this also applies to the, one out-of-the middle 2 at the top of the back. At the bottom of the, one out-of-the middle 2 you also have to use the 8mm female - male standoffs (Green).
+
+Mount the two M3x12 standoff F-F (Yellow) at the front with the last two of the M3x8 standoff M-F (Green)
 
 Place the displays on the top of the 11mm standoffs and mount them with the 6mm screws.
 
+<img src="https://raw.githubusercontent.com/btclock/btclock_v2/refs/heads/main/doc/Rev.B/IMG_3317.jpeg" width="750"/>
+
 Keep in mind that at the corners on the top of the first (left corner) and last (right corner) display you don't use a screw, this is where a 6mm standoff has to placed to screw the front pcb in combination with acrylic front. For mounting the fromt pcb with the acrylic front use the M3x10 screw.
 
+<img src="https://raw.githubusercontent.com/btclock/btclock_v2/refs/heads/main/doc/Rev.B/IMG_3310.jpeg" width="750"/>
+
 At last, place the acrylic back on the back with the last 8 M3x6 screws.
\ No newline at end of file