In this commit, we fix a bug in the rescan logic after a recent
refactoring that would cause the scanning node to potentially panic. If
the client disconnected, before the rescan was finished, then we would
return a nil `lastBlock` and `lastBlockHash`. We would then attempt to
send the rescan finished notification, causing a panic.
We remedy this by simply detecting this case (client disconnect), and
existing once again as the prior code would, pre-refactoring.
In this commit, we implement an optimization that will speed up clients
that attempt to perform a rescan in the past with no addresses. If the
client doesn't have any thing to search for, then we simply exit early
and send them a rescan finished notification with the final block in our
chain.
In this commit, we modify the rescanBlock method to also determine
whether a script (encoded as an address in its rescanKeys) has been
spent. Upon detecting a spend, a btcjson.RedeemingTxNtfn is sent to the
client who requested it.
In this commit, we modify the rescanKeys struct, which contains the
relevant keys that should be matched when rescanning the chain, to take
addresses in their string representation. This ends up simplifying a lot
of the logic as we no longer have to special-case specific script types.
This commit adds a logic to the addSpentRequests that inspects the
mempool for any spends of the outputs. Before this commit, a spend would
only be checked when a transaction was first accepted into the mempool.
This modifies all of the RPC code to use the chain parameters that are
associated with the RPC server instead of the global activeNetParams and
thus moves one step closer to being able to split the RPC server out
into a separate package.
This decouples the RPC server from the internal btcd server to move
closer to being able to split it out into a separate package.
In order to accomplish this, it introduces an rpcserverConfig type and
several new interfaces, named rpcserverPeer, rpcserverConnManager, and
rpcserverBlockManager, which are necessary to break the direct
dependencies on the main server and block manager instances.
It also adds concrete implementations of the new interfaces and uses
them to configure the RPC server.
Ultimately, the RPC server should ideally be decoupled even more such
that all of the types in the configuration struct use interfaces instead
of the concrete types. Doing this would make the RPC server much easier
to internally test since it would allow creating lightweight stubs for
the various pieces.
Now that glide is used for version management and a specific commit of
the upstream repository can be locked it is no longer necessary to
maintain a fork of the package specifically to keep a stable dependency.
While here, update the glide dependency for btcutil as well since it was
switched to use the upstream path as well.
This modifies the blockNode and BestState structs in the blockchain
package to store hashes directly instead of pointers to them and updates
callers to deal with the API change in the exported BestState struct.
In general, the preferred approach for hashes moving forward is to store
hash values in complex data structures, particularly those that will be
used for cache entries, and accept pointers to hashes in arguments to
functions.
Some of the reasoning behind making this change is:
- It is generally preferred to avoid storing pointers to data in cache
objects since doing so can easily lead to storing interior pointers
into other structs that then can't be GC'd
- Keeping the hash values directly in the block node provides better
cache locality
Avoid compatibility issues with software that relies on the behavior of
bitcoind's JSON-RPC implementation.
The JSON-RPC 1.0 spec defines that notifications must have their "id"
set to null and states that notifications do not have a response.
A JSON-RPC 2.0 notification is a request with "json-rpc":"2.0", and
without an "id" member. The specification states that notifications
must not be responded to. JSON-RPC 2.0 permits the null value as a
valid request id, therefore such requests are not notifications.
Bitcoin Core serves requests with "id":null or even an absent "id", and
responds to such requests with "id":null in the response.
Btcd does not respond to any request without and "id" or with "id":null,
regardless the indicated JSON-RPC protocol version.
In order to avoid compatibility issues with software relying on
Core's behavior, this commit implements "quirks mode" as follows:
- quirks mode can be enabled via configuration (disabled by default)
- If no JSON-RPC version is indicated in the request, accept and
respond to request with "id":null
- If no JSON-RPC version is indicated in the request, accept and
respond to requests without an "id" member
- In both cases above, use "id":null in the response
- Do not respond to request without an "id" or with "id":null when
JSON-RPC version is indicated in the request (process as notification)
This is mostly a backport of some of the same modifications made in
Decred along with a few additional things cleaned up. In particular,
this updates the code to make use of the new chainhash package.
Also, since this required API changes anyways and the hash algorithm is
no longer tied specifically to SHA, all other functions throughout the
code base which had "Sha" in their name have been changed to Hash so
they are not incorrectly implying the hash algorithm.
The following is an overview of the changes:
- Remove the wire.ShaHash type
- Update all references to wire.ShaHash to the new chainhash.Hash type
- Rename the following functions and update all references:
- wire.BlockHeader.BlockSha -> BlockHash
- wire.MsgBlock.BlockSha -> BlockHash
- wire.MsgBlock.TxShas -> TxHashes
- wire.MsgTx.TxSha -> TxHash
- blockchain.ShaHashToBig -> HashToBig
- peer.ShaFunc -> peer.HashFunc
- Rename all variables that included sha in their name to include hash
instead
- Update for function name changes in other dependent packages such as
btcutil
- Update copyright dates on all modified files
- Update glide.lock file to use the required version of btcutil
This commit is the first stage of several that are planned to convert
the blockchain package into a concurrent safe package that will
ultimately allow support for multi-peer download and concurrent chain
processing. The goal is to update btcd proper after each step so it can
take advantage of the enhancements as they are developed.
In addition to the aforementioned benefit, this staged approach has been
chosen since it is absolutely critical to maintain consensus.
Separating the changes into several stages makes it easier for reviewers
to logically follow what is happening and therefore helps prevent
consensus bugs. Naturally there are significant automated tests to help
prevent consensus issues as well.
The main focus of this stage is to convert the blockchain package to use
the new database interface and implement the chain-related functionality
which it no longer handles. It also aims to improve efficiency in
various areas by making use of the new database and chain capabilities.
The following is an overview of the chain changes:
- Update to use the new database interface
- Add chain-related functionality that the old database used to handle
- Main chain structure and state
- Transaction spend tracking
- Implement a new pruned unspent transaction output (utxo) set
- Provides efficient direct access to the unspent transaction outputs
- Uses a domain specific compression algorithm that understands the
standard transaction scripts in order to significantly compress them
- Removes reliance on the transaction index and paves the way toward
eventually enabling block pruning
- Modify the New function to accept a Config struct instead of
inidividual parameters
- Replace the old TxStore type with a new UtxoViewpoint type that makes
use of the new pruned utxo set
- Convert code to treat the new UtxoViewpoint as a rolling view that is
used between connects and disconnects to improve efficiency
- Make best chain state always set when the chain instance is created
- Remove now unnecessary logic for dealing with unset best state
- Make all exported functions concurrent safe
- Currently using a single chain state lock as it provides a straight
forward and easy to review path forward however this can be improved
with more fine grained locking
- Optimize various cases where full blocks were being loaded when only
the header is needed to help reduce the I/O load
- Add the ability for callers to get a snapshot of the current best
chain stats in a concurrent safe fashion
- Does not block callers while new blocks are being processed
- Make error messages that reference transaction outputs consistently
use <transaction hash>:<output index>
- Introduce a new AssertError type an convert internal consistency
checks to use it
- Update tests and examples to reflect the changes
- Add a full suite of tests to ensure correct functionality of the new
code
The following is an overview of the btcd changes:
- Update to use the new database and chain interfaces
- Temporarily remove all code related to the transaction index
- Temporarily remove all code related to the address index
- Convert all code that uses transaction stores to use the new utxo
view
- Rework several calls that required the block manager for safe
concurrency to use the chain package directly now that it is
concurrent safe
- Change all calls to obtain the best hash to use the new best state
snapshot capability from the chain package
- Remove workaround for limits on fetching height ranges since the new
database interface no longer imposes them
- Correct the gettxout RPC handler to return the best chain hash as
opposed the hash the txout was found in
- Optimize various RPC handlers:
- Change several of the RPC handlers to use the new chain snapshot
capability to avoid needlessly loading data
- Update several handlers to use new functionality to avoid accessing
the block manager so they are able to return the data without
blocking when the server is busy processing blocks
- Update non-verbose getblock to avoid deserialization and
serialization overhead
- Update getblockheader to request the block height directly from
chain and only load the header
- Update getdifficulty to use the new cached data from chain
- Update getmininginfo to use the new cached data from chain
- Update non-verbose getrawtransaction to avoid deserialization and
serialization overhead
- Update gettxout to use the new utxo store versus loading
full transactions using the transaction index
The following is an overview of the utility changes:
- Update addblock to use the new database and chain interfaces
- Update findcheckpoint to use the new database and chain interfaces
- Remove the dropafter utility which is no longer supported
NOTE: The transaction index and address index will be reimplemented in
another commit.
This commit converts all block height references to int32 instead of
int64. The current target block production rate is 10 mins per block
which means it will take roughly 40,800 years to reach the maximum
height an int32 affords. Even if the target rate were lowered to one
block per minute, it would still take roughly another 4,080 years to
reach the maximum.
In the mean time, there is no reason to use a larger type which results
in higher memory and disk space usage. However, for now, in order to
avoid having to reserialize a bunch of database information, the heights
are still serialized to the database as 8-byte uint64s.
This is being mainly being done in preparation for further upcoming
infrastructure changes which will use the smaller and more efficient
4-byte serialization in the database as well.
This commit modifies the createTxRawResult code path along with callers
to work with block headers as opposed to btcutil.Blocks. This in turn
allows the code in handleGetRawTransaction and
handleSearchRawTransactions to perform a much cheaper block header load
as opposed to a full block load.
While here, also very slightly optimize the createVinList function to
avoid creating a util.Tx wrapper and to take advantage of the
btcutil.Amount type added after the function was originally written
This allows clients watching for both to know when all mined
transaction notifications for the block have been received.
Otherwise, clients would be aware that there is a new block, see the
exact same block hash/height in the next tx notifications, but never
know when all txs from the block have been received and processed.
This fixes a synchronization issue in btcwallet where the wallet would
mark itself synced to some block height before any of those blocks'
transactions were processed. If the RPC connection is lost between
sending the blockconnected notification and receiving the last
transaction notification, the wallet would not know of this and
continue with missing transactions.
The limited user is specified with the --rpclimituser and
--rpclimitpass options (or the equivalent in the config file).
The config struct and loadConfig() are updated to take the
new options into account. The limited user can have neither
the same username nor the same password as the admin user.
The package-level rpcLimit map in rpcserver.go specifies
the RPC commands accessible by limited users. This map
includes both HTTP/S and websocket commands.
The checkAuth function gets a new return parameter to
signify whether the user is authorized to change server
state. The result is passed to the jsonRPCRead function and
to the WebsocketHandler function in rpcwebsocket.go.
The wsClient struct is updated with an "isAdmin" field
signifying that the client is authorized to change server
state, written by WebsocketHandler and handleMessage.
The handleMessage function also checks the field to
allow or disallow an RPC call.
The following documentation files are updated:
- doc.go
- sample-btcd.conf
- docs/README.md
- docs/json_rpc_api.md
- docs/configure_rpc_server_listen_interfaces.md
This commit converts the RPC server over to use the new features available
in the latest version of btcjson and improve a few things along the way.
This following summarizes the changes:
- All btcjson imports have been updated to the latest package version
- The help has been significantly improved
- Invoking help with no command specified now provides an alphabetized
list of all supported commands along with one-line usage
- The help for each command is automatically generated and provides much
more explicit information such as the type of each parameter, whether
or not it's optional or required, etc
- The websocket-specific commands are now provided when accessing the
help when connected via websockets
- Help has been added for all websocket-specific commands and is only
accessible when connected via websockets
- The error returns and handling of both the standard and websocket
handlers has been made consistent
- All RPC errors have been converted to the new RPCError type
- Various variables have been renamed for consistency
- Several RPC errors have been improved
- The commands that are marked as unimplemented have been moved into the
separate map where they belong
- Several comments have been improved
- An unnecessary check has been removed from the createrawtransaction
handler
- The command parsing has been restructured a bit to pave the way for
JSON-RPC 2.0 batching support
This commit reorders the RPC server code to more closely match the
ordering used by the rest of the code base such that functions are
typically defined before they are used and near their call site.
This changes the behavior of the rescan RPC to automatically set the
client up for transaction notifications for transactions paying to any
rescanned address and spending outputs in the final rescan UTXO set
after a rescanned is performed through the best block in the chain.
