This change replaces the previous "Hello, World!" :cli main stub with
the contents of the BisqGrpcClient as originally implemented in :grpc,
such that the following now works:
$ gradle build
$ ./bisq-daemon # in first terminal
$ ./bisq-cli # in second terminal
getVersion # user input to stdin
1.2.3 # rpc response
getBalance # user input to stdin
0.00 # rpc response
...
Or for a user experience closer to where things are headed:
$ echo getVersion | ./bisq-cli
1.2.3
Note that processing the above command is currently far too slow:
$ time echo getVersion | ./bisq-cli
1.2.3
real 0m1.634s # ouch
user 0m1.746s
sys 0m0.180s
Subsequent commits will work to bring this time down to a minimum.
Note: Includes the code quality changes originally made to
BisqGrpcClient in commit 7595387.
This change stubs out the `bisq-cli` utility with a placeholder main
method, such that the following now works:
$ gradle :cli:build
$ ./bisq-cli
Hello, World!
There are two structural / organizational reasons for this move:
1. References from one package to another should always be upward or
lateral, never downward, as the latter causes package cycles (aka
'tangles') which damage the suppleness and understandability of a large
codebase. Prior to this change the high-level bisq.core.CoreModule
class imported many classes from child packages like
bisq.core.{btc,dao,user,util}, etc. By moving CoreModule down into the
'.app' package, it can reference all these other packages as siblings
instead of doing so as a parent.
2. the bisq.core.desktop and bisq.core.app packages are the only
locations that reference the CoreModule class. By moving the class
into bisq.core.app, greater cohesion is acheived, again making the
codebase that much easier to read and understand.
Relevant issue thread: #3753
Currently the daily burnt BSQ chart under 'DAO -> Facts and Figures' is
distorted by outliers. This introduces a 'Zoom to inliers' toggle (off
by default), which, when toggled on, effectively zooms the chart to
inliers, thus removing the distortion. Also, a moving average is
plotted, to further improve the chart's readibility.
The chart is also changed from an area chart to a line chart, on the
presumption that it was an area chart for cosmetic reasons, but now that
there are two series in it (the moving average was added) an area chart
makes less sense.
Another noteworthy change is that the other chart in the screen, monthly
issued BSQ, has its Y axis set to start at zero, so as to improve
readability. This might seem outside the scope of this commit, but the
other changes involved some refactoring, which involved cleaning up some
duplicated logic, which involved configuring both of these charts
together, which involved forcing zero to be on the axis.
This implementation mixes some plotting logic (responsible for zooming
in on inliers) into the view logic, because I opted to implement said
zooming as an external manipulation of a chart's axis. I chose this in
favor of implementing a new Chart, because it would have required
including multiple large classes (relevant JavaFX's classes can't be
ergonomically extended) to the code base. I presumed that my chosen
solution will be easier to maintain.
I am not entirely happy with this choice and can see myself introducing
some plotting-related classes to encapsulate creating charts like these,
thus unmixing plotting logic from view logic. In the meantime this is a
working solution, and I plan to continue working on these charts in the
near future.
Allows computing a simple moving average lazily from a Stream, to be
used in plotting noisy data. Will be used in the daily burnt BSQ chart
under 'DAO -> Facts and Figures'. Can be easily modified to compute
other moving averages, like exponential.
This utility provides ways to zoom in a chart (more specifically its
axes) on inlier data points. The principal use-case is to restore
readability to charts that were distorted by outliers. The first (and
maybe the last) chart to use this is the daily burnt BSQ chart under
'DAO -> Facts and Figures'.
This provides an efficient way to calculate the standard deviation from
a DoubleStream, and is to be used in measuring whether or not a data
point on a chart axis is an inlier.
The Kahan summation algorithm is in a slightly different style, because
it's a faithful copy of its implementation in JDK 11's
DoubleSummaryStatistics.
* Use macOS app Info.plist setting for automatic light/dark title bar
* Update desktop/package/macosx/Info.plist
Co-Authored-By: Christoph Atteneder <christoph.atteneder@gmail.com>
Co-authored-by: Christoph Atteneder <christoph.atteneder@gmail.com>
When a user tries to take an offer which is above his limit, the old popup is still being shown.
It says that the user limits will be raised when his account is 2 months old.
But that is not true anymore, now we have account signing etc...
This fix uses the string that is already used for offer creation, which is good since preserves translations.
But I think we would need a better message, which I am afraid I cannot get done, showing the sign state and age.
I am submitting this PR as is now since I think this is a big issue.
New users might try to use Bisq to accept an offer, get this message and then decide to wait 2 months, in vain.
So, it partially fixes#3885.
If the user entered an invalid hostname for a custom BTC node, such as a
V3 onion address, after restarting Bisq they would be presented with an
error due to the node being unreachable and unable to continue nor
correct the config.
So now a warning message will be shown in this situation informing the
user of an invalid config and once they restart their client they will
connect to the provided BTC nodes.
Fixes#3137
This reverts commit 26c053dae8 because
Kotlin compilation slows down the build, was applied too broadly to all
modules instead of just the one that needed it, and most importantly
because we never actually went ahead with converting anything of
importance to Kotlin. The commit being reverted was basically a demo,
converting a single test type to show what kind of difference it would
make.
In the refactorings that will follow, Structure101 Studio and the
Structure101 Workspace IDEA plugin will be used to visualize and help
resolve tangles in the codebase. We were already ignore Studio
configuration files which end in .java.hsb, and this commit ignores the
newer Workspace product's .java.hsw files as well.
The previous commit introduces the BisqGrpcServer as a proof of concept,
but it is not yet ready for production use. This commit removes the
`--desktopWithGrpcApi` option that starts the gRPC server until such
time that it is production-ready.
This change also removes the `--desktopWithHttpApi` option for starting
an HTTP API server. The option has been in place for some time, but it
was 'false advertising' in the sense that nothing actually happened if
the user specified it, because there is in fact no HTTP API
implementation to be started.
Note that when the gRPC API option is reintroduced, it will be renamed
to `--rpcserver` or similar, following the convention in Bitcoin Core.
Problem: Editorconfig was configured to strip trailing whitespace in all
file types. This is generally a good thing, but when interactive
rebasing with Git and editing the contents of a commit, trailing
whitespace is significant on blank lines and must be preserved in order
for edits to be applied cleanly.
Solution: Update Editorconfig to exclude *.diff from the strip
whitespace rule, as interactive rebasing edits are done in a temporary
file with a '.diff' suffix.
This commit introduces a new `grpc` module including the following key
types:
- BisqGrpcServer: The API implementation itself, along with generated
gRPC Response/Reploy types defined in grpc/src/main/proto/grpc.proto.
- BisqGrpcServerMain: A 'headless' / daemon-like entry point for
running a Bisq node without the JavaFX desktop UI.
- BisqGrpcClient: A simple, repl-style client for the API that allows
the user to exercise the various endpoints as seen in the example
below.
In the `desktop` module, the BisqAppMain class has been modified to
start a BisqGrpcServer instance if the `--desktopWithGrpcApi` option has
been set to `true`.
In the `core` module, a new `CoreApi` class has been introduced
providing a kind of comprehensive facade for all Bisq functionality to
be exposed via the RPC API.
How to explore the proof of concept:
1. Run the main() method in BisqAppMain providing
`--desktopWithGrpcApi=true` as a program argument or alternatively, run
the main() method in BisqGrpcServerMain, where no special option is
required. In either case, you'll notice the following entry in the log
output:
INFO bisq.grpc.BisqGrpcServer: Server started, listening on 8888
2. Now run the main() method in BisqGrpcClient. Once it has started up
you are connected to the gRPC server started in step 1 above. To
exercise the API, type `getVersion` via stdin and hit return. You
should see the following response:
INFO bisq.grpc.BisqGrpcClient - 1.2.4
Likewise, you can type `getBalance` and you'll see the following
response:
INFO bisq.grpc.BisqGrpcClient - 0.00 BTC
and so forth for each of the implemented endpoints. For a list of
implemented endpoints, see BisqGrpcServer.start().
Note once again that the code here is merely a proof of concept and
should not be considered complete or production-ready in any way. In a
subsequent commit, the `--desktopWithGrpcApi` option will be disabled in
order to avoid any potential production use.
The content of this commit is the result of squashing a number of
commits originally authored by chimp1984 in the `chimp1984` fork's `grpc`
branch.
Co-authored-by: Chris Beams <chris@beams.io>
