Previously, the expire path, the remove path, and the onDisconnect
all used separate logic for updating the map, signaling listeners, and
removing PersistablePaylod objects from the data store. This led to a
bug where the onDisconnect path did not update the protectedDataStore.
Combine the three code paths to ensure that the same state is updated
regardless of the context.
The code to remove expired Entrys in the onDisconnect path was not
correctly removing the Entry from the protectedDataStore.
This patch adds a test that failed and fixes the bug.
* All of this work is done on the UserThread so there is no need to
clone the map.
* ArrayList objects are faster to iterate than HashSets and the data is
guaranteed to be unique since the source is a ConcurrentHashMap
* Finding all items to remove first, then removing them all is an easier
to read code pattern instead of removing during iteration.
It is currently possible to construct a valid Payload object
that implements both the ProtectedStoragePayload and
PersistableNetworkPayload interfaces even though this combination is
invalid.
Instead of depending on future reviewers to catch an error, assert that
ProtectedStoragePayloads and PersistableNetworkPayloads are incompatible
as objects inside a ProtectedStorageEntry.
This allows cleanup of removeExpiredEntries that branched on this
behavior.
The old PeerManagerTest was located under network/p2p/routing, which is
no longer the correct location. Additionally, it was outdated so I
just removed it and added a new file under network/p2p/peers containing
tests for checkMaxConnections.
All test callers now just ask the TestState for a SavedTestState instead
of SavedTestState ctor. This makes more sense with the object
relationship since SavedTestState is only used internally to TestState.
One monolithic test was useful when it was under development to reduce
code churn, but now that the tests are complete it is easier to find
and run a specific test when separated into separate test files.
This also fixes a downside of Enclosed.class that didn't allow individual
tests to be run in intellij.
Now that the unit tests cover all of the per-Entry validation,
the tests that create specific configuration of ProtectedStorageEntry
and ProtectedMailboxStorageEntry objects can be removed in favor
of mockable Entrys.
Using mocks prior to this patch was impossible due to the relationship
between the Entry objects and the P2PDataStorage helper functions. Now
that the objects are properly abstracted and tested, real unit tests
can be written for the P2PDataStore module.
This patch leaves the tests and adds an @Ignore so the reviewer can see
which unit test now supersedes the integration test.
Use a more compact version of string formatting
in log messages
Rename isMetadataEquals to matchesRelevantPubKey
which is more descriptive of the actual check
Now that all the code is abstracted and tested, the remove()
and removeMailboxData() functions are identical. Combine them and update
callers appropriately.
Now, any caller don't need to know the difference and it removes the
sharp edge originally found in #3556
Make the remove validation more robust by asserting that the
correct remove message is broadcast. This will provide a better
safety net when combining the remove functions.
Let the objects compare their metadata instead of doing it for them. This
allows for actual unit testing and paves the way for deduplicating the
remove code paths.
This patch also removes an unnecessary check around comparing the hash
of the stored data to the new data's hash. That check can't fail since
the hash was a requirement for the map lookup in the first place.
The current check verifies that the stored Payload.ownerPubKey == stored Entry.ownerPubKey.
This is the same check that was done when the item was originally added
and there is no reason to do it again.
This mailbox-only check can now exist inside the object for which it
belongs. This makes it easier to test and moves closer to allowing
the deduplication of the remove() methods.
Move the signature checks into the objects to clean up the calling code
and make it more testable.
The testing now has to take real hashes so some work was done in the fixtures
to create valid hashable objects.
Now that the objects can answer questions about valid conditions
for add/remove, ask them directly.
This also pushes the logging down into the ProtectedStorageEntry and
ProtectedMailboxStorageEntry and cleans up the message.
Method bodies are copied from P2PDataStore to separate refactoring
efforts and behavior changes.
Identified a bug where a ProtectedMailboxStorageEntry mailbox entry
could be added, but never removed.
The code around validating MailboxStoragePayloads is subtle when
a MailboxStoragePayload is wrapped in a ProtectedStorageEntry. Add tests
to document the current behavior.
The custom code to verify the refreshTTLMessage's signature and update
an entry isn't necessary. Just have the code construct an updated
ProtectedStorageEntry from the existing and new data, verify it,
and add it to the map.
This also allows the removal of the ProtectedStorageEntry APIs
that modify internal state.
The original test would take over 5 seconds. Allow tests to set the number
of required entries before purge to a lower value so the tests
can run faster with the same confidence.
Add tests for removing expired entries and optionally purging
the sequence number map. Now possible since these tests have
control over time with the ClockFake.
The remove validation needed to be improved since deletes through
the expire path don't signal HashMap listeners or write sequence numbers.
Reduces non-deterministic failures of the refreshTTL tests that resulted
from the uncontrollable System.currentTimeMillis().
Now, all tests have extremely fine control over the elapsed time between
calls which makes the current and future tests much better.
Switch from System.currentTimeMills() to
Clock.millis() so dependency injection can
be used for tests that need finer control of time.
This involves attaching a Clock to the resolver
so all fromProto methods have one available when they
reconstruct a message. This uses the Injector for the APP
and a default Clock.systemDefaultZone is used in the manual
instantiations.
Work was already done in #3037 to make this possible.
All tests still use the default system clock for now.
Use the DI Clock object already available in P2PDataStore, instead
of calling System.currentTimeMillis() directly. These two functions
have the same behavior and switching over allows finer control
of time in the tests.
Fix connection limit checks so as to prevent the following warning:
> WARN b.n.p2p.peers.PeerManager: No candidates found to remove (That
case should not be possible as we use in the last case all
connections).
Remove operations are now only processed if the sequence number
is greater than the last operation seen for a specific payload.
The only creator of new remove entrys is the P2PService layer that always increments
the sequence number. So, this is either left around from a time where
removes needed to work with non-incrementing sequence numbers or just
a longstanding bug.
With the completion of this patch, all operations now require increasing
sequence numbers so it should be easier to reason about the behavior in
future debugging.
Now returns false if the sequence number of the refresh matches
the last operation seen for the specified hash. This is a more expected
return value when no state change occurs.
The only callers are either P2PService users that always increment the
sequence number or the onMessage() handler which doesn't verify the return
so there will be no visible change other than the increased readability
of the code and deduplication of the code paths.
Now returns false on duplicate sequence numbers. This matches more of
the expected behavior for an add() function when the element previously exists.
The only callers are either P2PService users that always increment the
sequence number or the onMessage() handler which doesn't verify the return
so there will be no visible change other than the increased readability
of the code and deduplication of the code paths.
Removed duplicate log messages that are handled inside the various helper methods
and print more verbose state useful for debugging.
Updated potentially misleading comments around hashing collisions
Fix a bug where remove() was called in the addMailboxData()
failure path.
1. Sender's can't remove mailbox entries. Only
the receiver can remove it so even if the previous add() failed and
left partial state, the remove() can never succeed.
2. Even if the sender could remove, this path used remove() instead
of removeMailboxData() so it wouldn't have succeed anyway.
This patch cleans up the failure path as well as adds a precondition
for the remove() function to ensure future callers don't use them for
ProtectedMailboxStorageEntrys.
Change the use of "public api" to "Client API" to describe the set of
callers that use the pattern addProtectedStorageEntry(getProtectedStorageEntry())
as a contrast to the onMessage handler users or the GetData users.
* Limit max. nr. of PersistableNetworkPayload and ProtectedStorageEntry to 10000
To avoid that seed nodes get overloaded with requests for too many
PersistableNetworkPayload and ProtectedStorageEntry data we limit nr. of
entries to max 10000.
* Add peers node address to logs
* Improve logs
- Add log of size to GetBlocksResponse.toProtoNetworkEnvelope method
- Log in kb
* Log connection UID if not peer address available
* Add cleanup code or invalid objects
We have an invalid Filter object in the live network (prob. some dev
made some mistake). This code helps so clean that up.
* Add log
Instead, create a ProtectedStoragePayloadStub class which mocks out the required
protobuf Message for hashing. The hash is equal to the ownerPubKey so they are unique.
These tests create real versions of the supported Payload & Entry types and
run them through the 3 entry points (onMessage, Init, standard add()/remove()/refresh(),
to verify the expected return values, internal state changes, and
external signals (listeners, broadcasts).
The tests are involved and I am proposing future work to make many of the objects
more testable that will greatly reduce the work and tests cases needed.
This work identified a few unexpected scenarios and potential bugs that are addressed
in dependent pull requests.
Code coverage when running P2PDataStorageTest:
Before:
Line: 4%
Branch: 0%
After:
Line: 78%
Branch 76%
* New trade protocol (#3333)
* Remove arbitration key, cleanup
* Add BuyerAsMakerProcessDepositTxAndDelayedPayoutTxMessage
* Adopt trade protocol
- Add handler for DepositTxAndDelayedPayoutTxMessage
- Change handler for DepositTxPublishedMessage
- Add MakerSetsLockTime
- Rename MakerProcessPayDepositRequest to MakerProcessPayDepositRequest
- Rename MakerSendPublishDepositTxRequest to MakerSendsProvideInputsForDepositTxMessage
- Rename DepositTxPublishedMessage to DelayedPayoutTxSignatureRequest
- Rename MakerProcessDepositTxPublishedMessage to MakerAsBuyerProcessSignDelayedPayoutTxMessage
* Remove arbitratorKey
* Add new classes
* Add new message classes
* Add new task classes
* Renamed classed (no functional change yet)
* Add lockTime
* Add delayedPayoutTxSignature field
* Add useReimbursementModel field
* Add new classes
* Add setting.preferences.useReimbursementModel
* Apply renamed classes (new classes not added yet)
* Add useReimbursementModel
* Add preferences param
* Add new methods, cleanup
* Add daoFacade param, apply renaming
* Add delayedPayoutTx, lockTime and delayedPayoutTxId
- Support daoFacade param
* Remove DirectMessage interface
* Rename emergencySignAndPublishPayoutTx method, add new one for 2of2 MS
* Apply new protocol
* Apply new protocol
* Add renaming (no functional change yet)
* Add new messages, apply renaming
* Remove unneeded P2SHMultiSigOutputScript
* Remove PREFERRED_PROJECT_CODE_STYLE
* Refactor: Rename class
* Use InputsForDepositTxRequest instead of TradeMessage in handleTakeOfferRequest
* Do not sign deposit tx if maker is seller
We change behaviour that the maker as seller does not send the pre
signed deposit tx to the taker as the seller has more to lose and he
wants to control the creation process of the delayed payout tx.
* Apply new trade protocol to seller as maker version
* Apply new trade protocol
Delayed payout tx are now working for all scenarios but we use a small
hack to get around an issue with not receiving confirmations and the
peers tx.
We add a tiny output to both peers, so we see the tx and confirmation.
Without that only the publisher sees the tx and confirmations are not
displayed. Need further work to get that working without that extra
outputs.
* Set TRADE_PROTOCOL_VERSION to 2
* Add PeerPublishedDelayedPayoutTxMessage
We need add the delayed payout tx to the wallet once the peer publishes
it. We will not see the confidence as we do not receive or sent funds
from our address. Same is with dispute payouts where one peer does not
receive anything. Then the confidence is not set. It seems that is a
restriction in BitcoinJ or it requires some extra handling. We set the
confidence indicator invisible in the dispute case and that might be an
acceptable option here as well.
* Add refund agent domain
* Add refundAgentNodeAddress
* Apply refund domain
* Add refund views
* Apply refundAgent domain
* Support refundAgent
* Remove useReimbursementModel field
We dont need in the offer anymore the decision if reimbursement or
arbitration is chosen.
* Apply refundAgent payout
* Handle tx info and balances
* Remove mediation activation
* Add new tac accepted flag for v1.2.0 and adjust text
* Fix params for test classes
* Signed witness trading (#3334)
* Added basic UI for account signing for arbitrators
* Add domain layer for signed account age witnesses (credits ManfredKarrer and oscarguindzberg)
* Remove testing gridlines
* Arbitrator sign accountAgeWitnesses
Automatically filter to only sign accounts that
- have chargeback risk
- bought BTC
- was winner in dispute
* Handle chargebackrisk by currency
* Check winners only for closed disputes
* Show sign status of paymentaccounts in AccountsView
* Rename service to accountAgeWitnessService
* Refactor: Move account signing helpers to AccountAgeWitnessService
* Refactor: rename hasSignedWitness to myHasSignedWitness
* Show if witness is signed in offerbook view
* Use witness sign age for age comparison
* Refactor: rename to isTaker... to isMyTaker...
* Allow trading with signed witnesses
* Use witness age for showing account age icon
* Move AccountAgeRestrictions into AccountAgeWitnessService
* Handle trade limit of unverified accounts as normal case
* Avoid optional as argument
* Set trade limit depending on trade direction
* Avoid optional arguments
* Add text for seller as signer
* Seller with signer privilege signs buyer witness
* Fix merge issues
* Remove explicit check for risky offers
* Remove sellers explicit account age check
* Add limit check based on common accountAgeWitness function
* Fix arbitrator key event handling
* Filter accounts on tradelimit instead of maturity
* Fix test
* Buyer sign seller account
Add SIGNED_ACCOUNT_AGE_WITNESS capability
* Fix checks for signing at end of trade
Get correct valid accounts for offer
* Rename BuyerDataItem -> TraderDataItem
* Arbitrator sign both parties in a buyer payout dispute
* Only sign unsigned accountAgeWitnesses
* Remove unused code
* Add demo for material design icons
* Use different account age limits for sell/buy
* Fix signing interface for arbitrator
* Add signing state column to offer book
* Add signing state to fiat accounts overview
* Add signing state to selected fiat account
* Fix popover padding
* Add account signing state to peer info popup
* Retrieve only unsigned witnesses for arbitrator to sign
* Accounts signed by arbitrators are signers
* Disable test due to travis issues
* Improve witness handling (#3342)
* Fix comparison
* Add display strings for witness sign state
* Fix immaturity check
* Use accountAgeWitness age for non risky payment methods
* Show information about non risky account types
* Fix peer info icon account age text
* Complete new trade protocol (#3340)
* Improve handling of adding tx to wallet
* Add delayedPayoutTx to dispute
* Fix test
* Use RECIPIENT_BTC_ADDRESS from DAO for trade fee
* Set lockTime to 10 days for altcoins, 20 days others.
- Devmode uses 1 block
* Fix params
* Update text
* Update docs
* Update logging
if (log.isDebugEnabled()) only matches if logLevel is debug not
if it is INFO
* Remove log
* Remove arbitrator checks
* Remove arbitrator address
- It works not if not legacy arbitrator is registered.
We cannot remove too much from arbitration as we would risk to break
account signing and display of old arbitration cases.
Though if testing time permits we should try to clean out more of
arbitration domain what is not needed anymore.
* Use account signing state in accounts view (#3365)
* Add account signing icons to signing state in account display
* Remove unnecessary "." that caused layout issues in the past
* Add additional warning in the received payment popup for account signer
* Fix Revolut padding issues for currencies
* Hide signing icon for non-high-risk payment methods
* Add correct icon state and info text for account signing state
* Remove not implemented notification part
* Test self signing witnesses
* Change verified account limit factor to 0.5
* Account Signing: Add information popups for signing state (#3374)
* Add account signing icons to signing state in account display
* Remove not implemented notification part
* Hide time since signing column when not needed
* Remove fiat rounding popup as feature was introduced a long time ago already
* Add information popups for new signed states (only shown once for user) and minor clean-ups
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: sqrrm <sqrrm@users.noreply.github.com>
* Account Signing: Improve signed state notificaton (#3388)
* Remove new badge from Altcoin instant feature
* Remove new badge from percentage user deposit feature
* Fix line break issues in received payment confirmation popup
* Check if received payload fulfills signing state condition and not any personal witness
* Show additional badge for account sections to guide user to check out new signing states
* Fix account signing state in offer book (#3390)
* Account Signing: Fix verified usage (#3392)
* Rename witnessHash -> accountAgeWitnessHash
* Add enum for SignedWitness verification method
* Fix usage of isValidAccountAgeWitness
* Revert icon for signstate change
* Account signing: add signing state to payment account selection (#3403)
* Clean up dead code parts
* Add account signing state to payment account selection
* Account signing: revert dev date setting for trusted accounts (#3404)
* Revert temporary value for dev testing
* Only enable button if there are accounts to be signed
* Add trade limit exceptions (#3406)
* Remove dead code
* Add trade limit exception for accounts signed by arbitrator
* Update translations to adapt to new unified delay (#3409)
* NTP: Fix a couple of UI issues in the New Trade Protocol (#3410)
* Add badge support for refund agent (new arbitrator) tickets
* Fix translation typo
* Clean up arbitrator issues in translation
* Only show refund agent label to support staff
Every user should still see this role as arbitration
* NTP: Improve differentiation between mediation and new arbitration (#3414)
* Clean up property exposure
* Improve differentiation between mediation and arbitration cases
* Go to new refund view if it is no mediation and not open mediation notification if refund is already in progress
* Don't sign filtered accounts
* NTP: merge with master (#3420)
* Temporarily disable onion host for @KanoczTomas's BTC node
* Add Ergo (ERG) without Bouncy Castle dependency.
See #3195.
* List CTSCoin (CTSC)
* Tweak the English name of Japan Bank Transfer payment method
* Add mediator prefix to trade statistics
* List Faircoin (FAIR)
* List uPlexa (UPX)
* Remove not used private methods from BisqEnvironment
* Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- Rename BisqSetupCompleteListener to BisqSetupListener
- Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- make onInitP2pNetwork and onInitWallet default so no impl. required
* Start server at onInitWallet and add wallet password handler
- Add onInitWallet to HttpApiMain and start http server there
- Add onRequestWalletPassword to BisqSetupListener
- Override setupHandlers in HttpApiHeadlessApp and adjust
setRequestWalletPasswordHandler (impl. missing)
- Add onRequestWalletPassword to HttpApiMain
* Add combination (Blockstream.info + Mempool.space) block explorer
* Revert "Temporarily disable onion host for @KanoczTomas's BTC node"
This reverts commit d3335208bb.
* Temporarily disable KanoczTomas btcnode on both onion and clearnet
* Refactor BisqApp - update scene size calculation
* Refactor BisqApp - update error popup message build
* Refactor BisqApp - move icon load into ImageUtil
* Remove unused Utilities
* Increase minimum TX fee to 2 sats/vByte to fix#3106 (#3387)
* Fix mistakes in English source (#3386)
* Fix broken placeholders
* Replace non existing pending trades screen with open trades screen
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update message in failed trade popup
* Refactor BisqEnvironment
* Account Signing: Improve arbitrator signing flow (#3421)
* Pre-select a point of time 2 months in the past
So all arbitrator signed payment accounts will have their limits lifted completely
* Only show payment methods with high chargeback risk to be signed
* Show connected Bitcoin network peer info
* List Ndau (XND)
- Official project URL: https://ndau.io/
- Official block explorer URL: https://explorer.service.ndau.tech
* List Animecoin (ANI)
* Apply rule to not allow BSQ outputs after BTC output for regular txs (#3413)
* Apply rule to not allow BSQ outputs after BTC output for regular txs
* Enforce exactly 1 BSQ output for vote reveal tx
* Fix missing balance and button state update
* Refactor isBtcOutputOfBurnFeeTx method and add comments and TODOs
No functional change.
* Handle asset listing fee in custom method
We need to enforce a BSQ change output
As this is just tx creation code it has no consequences for the hard
fork.
* Use getPreparedBurnFeeTxForAssetListing
* Update comments to not use dust output values
* Fix missing balance and button state update
* Use same method for asset listing fee and proof of burn
Use same method for asset listing fee and proof of burn as tx structure
is same.
Update comments to be more general.
* Use getPreparedProofOfBurnTx
* Require mandatory BSQ change output for proposal fee tx.
We had in the doc stated that we require a mandatory BSQ change output
but it was not enforced in the implementation, causing similar issues
as in Asset listing and proof of burn txs.
* Add fix for not correctly handled issuance tx
* Use new method for issuance tx
// For issuance txs we also require a BSQ change output before the issuance output gets added. There was a
// minor bug with the old version that multiple inputs would have caused an exception in case there was no
// change output (e.g. inputs of 21 and 6 BSQ for BSQ fee of 21 BSQ would have caused that only 1 input was used
// and then caused an error as we enforced a change output. This new version handles such cases correctly.
* Handle all possible blind vote fee transactions
* Move check for invalid opReturn output up
* Add dust check at final sign method
* Fix incorrect comments
* Refactor
- Remove requireChangeOutput param which is always false
- Remove method which is used only by one caller
- Cleanup
* Add comment
* Fix comments, rename methods
* Move code of isBlindVoteBurnedFeeOutput to isBtcOutputOfBurnFeeTx
* Update account signing strings for v1.2 release (#3435)
* Update account signing strings for v1.2 release
* Add minor corrections from ripcurlx review
* Adjust tradeLimitDueAccountAgeRestriction string
So that it describes why an account isn't signed (in general) instead of
why it wasn't signed by an arbitrator.
* Account Signing/NTP: More improvements and fixes (#3436)
* Select the the correct sub view when a dispute is created
* Require capability REFUND_AGENT to receive RefundAgent Messages
* Remove unused return type for account signing
* Add new feature popup for account signing and new trade protocol
* Return void from account signing
* Fix bug with not updating vote result table at vote result block
* NTP: improve backwards compatibility for mediation (#3439)
* Improve readability of offer update
* Add type safeguard for dispute lists
* Set not existing dispute support type for clients < 1.2.0 from message support type
* Enable handling of mediation cases for old trade protocol disputes in 1.2.0 clients
* Remove unnecessary forEach
* Use correct formatter and add missing value for placeholder
* Bump version number
* Add sign all checkbox. Fix list entry display (#3450)
* Add sign all checkbox. Fix list entry display
* Add summary to log and clipboard
* Use safe version for seednodes (#3452)
* Apply shutdown and memory check again
To not risk issues with the release and seed nodes we merge back the
old code base for handling memory check and shutdowns.
The newly added changes for cross connecting between seed nodes cause
out of memory issues and require more work and testing before it can be
used.
* Revert code change for periodic updates between seed nodes.
The periodic updates code caused out of memory issues and require more
work and testing before it can be used.
* Arbitrator republish signedWitnesses on startup (#3448)
* Arbitrator republish signedWitnesses on startup
* Keep republish internal to SignedWitnessService
* Improve new feature popup for ntp and account signing (#3453)
* Do not commit delayedPayoutTx to avoid publishing at restart
Fixes https://github.com/bisq-network/bisq/issues/3463
BitcoinJ publishes automatically committed transactions.
We committed it to the wallet to be able to access it later after a
restart. We stored the txId in Trade and used that to request the tx
from the wallet (as it was committed). Now we store the
bitcoin serialized bytes of the tx and do not commit the tx before
broadcasting it (if a trader opens refund agent ticket).
* [1.2.0] Update client resources (#3456)
* Update bitcoinj checkpoint file
* Update data stores
* Update translations
* [1.2.0] Improve new feature popup (#3465)
* Improve layout of new feature popup
* Extract external hyperlinks into component to make it easier to update
* Comment in necessary showAgain check
* Add Raspberry Pi to build process (#3466)
* Add Raspberry Pi to build process
* Rename deploy variable to improve readability
* Update informational prompt upon creating fiat account with account signing details (#3467)
* Update informational prompt upon creating fiat account with account signing details
* Fix wrong buyer limit for first 30 days
* Set delayedPayoutTxBytes when setting delayedPayoutTx
Fixes https://github.com/bisq-network/bisq/issues/3473
The delayedPayoutTx is not committed to the wallet as long it is not
published. The seller who creates the delayedPayoutTx has not stored the
delayedPayoutTxBytes which caused a nullpointer after restart.
* Minor updates (#3474)
* Remove unnecessary log statement
This seems to be a left over log statement from debugging.
* Use a small delay for MakerSetsLockTime on regtest
When testing on regtest, not in devmode, we want a relatively short
delay to be able to test the delay period.
* Clarify payment limits up to 30 days after signing
* Update RECIPIENT_BTC_ADDRESS for regtest (#3478)
Use an address that is owned by the regtest wallet in the dao-setup.zip
file. This allows for easily verifying BTC trading fees are sent to
this address correctly. Also, it helps verify spending of the time lock
payout.
* Remove btc nodes from Manfred Karrer (#3480)
* Avoid null objects (#3481)
* Avoid null objects
* Remove check for type
Historical data can be arbitration instead of mediation (arbitration
was fallback at last update), so we need to tolerate the incorrect type
here. Is only for tickets from pre 1.2.
* Display appropriate account age info header
Depending on charge back risk type, accounts should show
accountAgeWitness age or time since signing
* Set amount for delayed payout tx to 0 (#3471)
We have shown the spent funds from the deposit tx to the bisq donation
address before. But that was incorrect from the wallet perspective and
would have lead to incorrect summary of all transaction amounts. We set
it now to 0 as we are not spending funds nor receiving any in our wallet.
* Check for result phase at activate method
Fixes https://github.com/bisq-network/bisq/issues/3487
* Only show warning for risky payment menthods (#3497)
* Fix style issues with dark mode (#3495)
* Addresses issues mentioned in https://github.com/bisq-network/bisq/issues/3482#issuecomment-546812730 (#3496)
* Clean up trade statistics from duplicate entries (#3476)
* Clean up trade statistics from duplicate entries
At software updates we added new entries to the extraMap which caused
duplicate entries (if one if the traders was on the new and the other on
the old version or at republishing). We set it now json exclude so avoid
that in future and clean up the map.
* Avoid repeated calls to addPersistableNetworkPayloadFromInitialRequest
For trade stat cleanup we don't want to apply it multiple times as it
is a bit expensive. We get from each seed node the initial data response
and would pollute with the second response our map again and if our node
is a seed node, the seed node itself could not get into a clean state and
would continue pollution other nodes.
* Refactor
Remove not used param
Rename method
Inline method
Cleanups
* Change unsigned to N/A
* [1.2.0] Update data stores and adding SignedWitnessStore (#3494)
* Update data stores and adding SignedWitnessStore
* Update translations
* Update cleaned TradeStatistics2Store and changes in other stores
* VoteResultView update results on any block in result phase
Avoid updating the result more than once per result phase but make
sure it's done if activated during the result phase
* [1.2.0] Format maker fee for BTC and BSQ correctly (#3498)
* Format maker fee for BTC and BSQ correctly
* Update tests
* Only automatically open popup if result wasn't accepted and disable action button when being accepted (#3503)
* Fix tradestatistics (#3469)
* Remove delayed re-publishing of tradeStatistics
This was done earlier when only maker was publishing trade statistics.
Now both traders do it so we get already higher resilience.
* Remove unused method
Forgot in prev. commit to remove also the method.
* Remove support for TradeStatistics2.ARBITRATOR_ADDRESS
* Add comment and set ARBITRATOR_ADDRESS deprecated
* Remove setting of arbitrator data from makers side
The 2 arbitrator related fields in Trade are only set by the maker and
not used anymore for reading, so it can be removed. The whole arbitrator
domain should be cleaned out some day, but because of backward
compatibility issues it id difficult to do it entirely at release date.
With release after v 1.2. when no old offers are out anymore we are
able to clean up that domain.
* Remove dev log
* Update translations
* [1.2.0] Improve dispute section (#3504)
* Improve wording for mediation summary and add specific next steps for refund agent case
* Select the first dispute case when entering the support section
* Revert to SNAPSHOT version
* Fix but with initialRequestApplied (#3512)
* Fix resource name (#3514)
* Remove minor version number in news popup
* Fix copy SignedWitnessStore db script
* Not show payment account details for blocked offers
* Use age of accountAgeWitness as basis for sell limits
* Bump version number
* Revert to SNAPSHOT version
* Merge v1.2.0/v1.2.1 with master (#3521)
* List Krypton (ZOD)
* Temporarily disable onion host for @KanoczTomas's BTC node
* Add Ergo (ERG) without Bouncy Castle dependency.
See #3195.
* List CTSCoin (CTSC)
* Tweak the English name of Japan Bank Transfer payment method
* List Animecoin (ANI)
* Add mediator prefix to trade statistics
* List Faircoin (FAIR)
* List uPlexa (UPX)
* Remove not used private methods from BisqEnvironment
* Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- Rename BisqSetupCompleteListener to BisqSetupListener
- Add onInitP2pNetwork and onInitWallet to BisqSetupListener
- make onInitP2pNetwork and onInitWallet default so no impl. required
* Start server at onInitWallet and add wallet password handler
- Add onInitWallet to HttpApiMain and start http server there
- Add onRequestWalletPassword to BisqSetupListener
- Override setupHandlers in HttpApiHeadlessApp and adjust
setRequestWalletPasswordHandler (impl. missing)
- Add onRequestWalletPassword to HttpApiMain
* Add combination (Blockstream.info + Mempool.space) block explorer
* Revert "Temporarily disable onion host for @KanoczTomas's BTC node"
This reverts commit d3335208bb.
* Temporarily disable KanoczTomas btcnode on both onion and clearnet
* Refactor BisqApp - update scene size calculation
* Refactor BisqApp - update error popup message build
* Refactor BisqApp - move icon load into ImageUtil
* Remove unused Utilities
* Increase minimum TX fee to 2 sats/vByte to fix#3106 (#3387)
* Fix mistakes in English source (#3386)
* Fix broken placeholders
* Replace non existing pending trades screen with open trades screen
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update message in failed trade popup
* Refactor BisqEnvironment
* List Ndau (XND)
- Official project URL: https://ndau.io/
- Official block explorer URL: https://explorer.service.ndau.tech
* Show connected Bitcoin network peer info
* Not show payment account details for blocked offers (#3425)
* Add GitHub issue template for user reported bugs (#3454)
* Add issue template with steps to reproduce and actual/expected behavior
* Fix typo in .github/ISSUE_TEMPLATE.md
* Fix wrong auto merge
* Add CapabilityRequiringPayload to TradeStatistics2
With v1.2.0 we changed the way how the hash is created.
To not create too heavy load for seed nodes from
requests from old nodes we use the SIGNED_ACCOUNT_AGE_WITNESS
capability to send trade statistics only to new nodes.
As trade statistics are only used for informational purpose it will
not have any critical issue for the old nodes beside that they don't see the latest trades.
* Fix tradestat hash issue (#3529)
* Recreate hash from protobuf data
To ensure all data are using the new hash method (excluding extraMap) we
do not use the hash field from the protobug data but pass null which
causes to create the hash new based on the new hash method.
* Add filter.toString method and log filter in case of wrong signature
We have atm a invalid filter (prob. some dev polluted a test filter to mainnet)
* Change log level, add log
* Refactor: Move code to dump method
* Add TRADE_STATISTICS_HASH_UPDATE capability
We changed the hash method in 1.2.0 and that requires update to 1.2.2
for handling it correctly, otherwise the seed nodes have to process too
much data.
* Add logs for size of data exchange messages
* Add more data in log
* Improve logs
* Fix wrong msg in log, cahnge log level
* Add check for depositTxId not empty
* Remove check for duplicates
As we recreate the hash for all trade stat objects we don't need that
check anymore.
* Add logs
* Temporarily remove this part of the statistics
It prevents merging with master because through auto merge a duplication of this part of the code is happening and prevents Travis from succeeding
* Refactored logging into subroutine
* Only do recurring updatedatareq if seednode
* UpdateDataReq is run periodically
* Only store PeristablePayloads once
* Refactoring: Move arbitration package inside dispute package
* Use abstract base class DisputeResolver for arbitrator
* Refactoring: Move mediator to mediator package.
* Let Mediator inherit DisputeResolver.
* Do not use protobuf inheritance
- Do not use protobuf inheritance for Arbitrator and Mediator as it
would break backward compatibility (and protobuf inheritance sucks
anyway)
* Refactoring: Move ArbitratorModule to parent package
* Refactoring: Rename ArbitratorModule to DisputeModule
* Add mediators to Filter
* Add mediators to filter window
* Use abstract DisputeResolverService as base class for ArbitratorService
- Add common base class for ArbitratorService and MediatorService
* Fix test
* Use abstract DisputeResolverManager as base class for ArbitratorManager
- Add common base class for ArbitratorManager and MediatorManager
* Refactor: Move arbitratorregistration package inside register pkg
* Refactor: Rename arbitratorregistration package to arbitrator
* Add registration view for mediator
- With cmd+D one can open the mediator regisration in account screen.
For arbitrator its cmd+R
* Separate pub key list for mediator (no new keys added yet)
* Set new pubkeys for mediator registration
- Before release set new keys from maintainer who manages keys
* Set disputes @Nullable. Add null checks
* Remove pre v0.9 handling for supported arbitrators from offer
- We changed handling of arbitrator selection with v0.9 so the
supported arbitrators in the offer is not used anymore. As we
enforced v1.2 a while back for trading we can be sure no pre v0.9
clients are used anymore and we can remove the optional code part.
* Remove supported arbitrators info in offer details window
- As we do not use supported arbitraors in offer anymore since v0.9
we can remove that.
* Remove check for matching arbitrator languages
As we do not use the supported arbitratos from offer since v0.9 we can
remove that check.
* Remove not used classes
* Remove checks for arbitrator and mediator in offer
We do not use those fields anymore. We still need to keep the fields
not nullable as old clients have the check still.
* Add check if sig of proto object is not empty
We got in dev testing sometimes an empty protobuf Alert. Might be
caused from protobuf copatibility issues during development but not
100% clear.
As it causes an exception and corrupted user db file we prefer to set
it to null.
* Remove TakerSelectMediator
This is not used anymore. Currently we would get an exception in the
trade but with follow up changes we will fix that...
Mediator handling and selection will be done the same way like
arbitrator. The current mediator handling was a relict from earlier
partial support for mediators which never got completed. As still a
null check is in place we need to ensure backward compatibility.
* Set arbitratorNodeAddresses and mediatorNodeAddresses to deprecated
We do not use arbitratorNodeAddresses and mediatorNodeAddresses anymore
but as there is a null check we still need to keep the field ans set it
to an empty arrayList.
* Make ArbitratorSelection generic. Add MEDIATOR_ADDRESS
We want to use the same selection algorithm for mediators as for
arbitrators, so we make ArbitratorSelection generic.
We add MEDIATOR_ADDRESS as extraMap entry to TradeStatistics2 to be
able to track number of trades with specific mediators.
ExtraMap is used to add new data to existing protobuf definitions which
is supported also by not updated clients. Adding a new protobuf field
would only be supported by new clients. As mediator support is a new
feature we could add a new field but to keep it in the same style like
arbitrator we prefer to use the map here as well.
* Refactor: Rename ArbitratorSelection to DisputeResolverSelection
* Add mediator to OfferAvailabilityResponse and mediatorNodeAddress to OpenOffer
WIP for supporting mediator selection the same way like arbitrators.
* Make arbitrator not nullable
We can ensure that all users are post v0.9 so we can remove the nullable
support.
* Add selectedMediator to OfferAvailabilityModel
Remove nullable support in ProcessOfferAvailabilityResponse as we can
ensure all clients are post v0.9
* Refactor: Rename method
* Add todo for using more generic keys for display strings
* Refactor: Rename method
* Fix wrong handling of registeredMediator
Fix copy/paste error
* Add mediatorNodeAddress to trade
* Handle nullable mediator in ProcessOfferAvailabilityResponse
We do not get the mediator set from old clients but we expect a not null
value so we use the DisputeResolverSelection in case it is null.
We need to pass mediatorManager and tradeStatisticsManager to the
OfferAvailabilityModel.
* Change log level, cleanup
* Revert changes in OfferPayload due backward compatibility issues
Because of backward compatibility issues we needed to revert the removal
of arbitratorNodeAddresses and mediatorNodeAddresses. The signature
check for the offer would fail as an old client would send a not-empty
list but new clients would have had an empty list, so the hash
would be different and the sig check fail and we would not accept that
offer. That is the reason why we still need to support those data even
it is not used anymore.
This is one of the more tricky cases for backward compatibility issues.
This version now is tested between new and old clients and trade and
disputes work.
* Add checks if any mediator is available
* Cleanup classes
* Fix test
* Add mediator DisputeStates
Add isMediationDispute to Dispute class.
If a dispute opening gets requested we check if state is
DisputeState.NO_DISPUTE and the open mediation. If state is
DisputeState.MEDIATION_REQUESTED we open arbitration.
* Cleanup; support isMediationDispute
* Handle mediator data in Dispute domain
- Add getConflictResolverNodeAddress method to Dispute to resolve
arbitrator or mediator address based on isMediationDispute flag.
- Rename arbitratorPubKeyRing to conflictResolverPubKeyRing in Dispute.
We cannot rename arbitratorPubKeyRing in the protobuf definition
as it would break backward compatibility.
* Add support for mediation in dispute domain
- Add isMediationDispute method to ChatSession
- Add isMediationDispute method to DisputeCommunicationMessage
- Add isMediationDispute to dispute id
- Refactor findDispute method
- Add null checks
- Cleanups
* Remove impossible case
Reserved and locked funds are used for offers and trades only.
* Fix typos
* Handle mediator and arbitrator strings
- Work in progress of adjusting correct terms.
- Cleanups
* Refactor: Rename arbitrator package to disputeresolvers
* Refactor: Rename ArbitratorDisputeView classes to DisputeResolverView
* Add support for close ticket from mediator (WIP)
In mediator case we do not create any transaction but only send the
dispute result which contains the mediators recommended payout
distribution. At teh traders we set the disputeState in the trade to
closed. This will be used in the next commits to update the trade so
that the traders get displayed the recommended payout and get asked if
they agree to that.
* Refactoring: Rename class
Rename MessageDeliveryFailedException to
DisputeMessageDeliveryFailedException
* Refactoring: Move dispute classes to dispute package
* Refactoring: Move Attachment class to dispute package
* Refactoring: Move package one level up
Move bisq.core.dispute.arbitration.messages to
bisq.core.dispute.messages
* Add todo comment
* Use ARBITRATION instead of DISPUTE
* Make DisputeManager abstract base class for ArbitrationDisputeManager
WIP for separating DisputeManager to ArbitrationDisputeManager and
MediationDisputeManager
* Add MediationDisputeManager
* Add MediationDisputeManager and ArbitrationDisputeManager to test
* Add mediationDisputeManager to relevant classes
There are some cases where arbitrationDisputeManager only is used.
Those are usually related to the payout tx. As mediators do not do a
payout we don't need it there.
* Add TradersArbitrationDisputeView and TradersMediationDisputeView
WIP for separating TraderDisputeView
* Refactor: Rename class
* Refactor: Rename support.tab.support to support.tab.mediation.support
I am aware that committing non default translation files is not
recommended, but I think in that case it helps to avoid to show errors
for developers who use non-english locale. The changes will be
overwritten by transifex once it gets synced...
* Add DisputeView as common base class
Further refactor separation of diff. dispute views
* Refactor: Rename package
* Refactor: Rename DisputesView to SupportView
* Refactor: Rename package
* Add MediationDisputeManager to CorePersistedDataHost
* Add MediationDisputeList as db file, refactor DisputeList
WIP for making Dispute domain more generic. We want to separate
arbitration and mediation clearly.
* Further refactoring to split mediation and arbitration
* Further refactoring to split mediation and arbitration
Move methods used for arbitration only to ArbitrationDisputeManager
* Refactor: Rename package
Rename bisq.core.dispute to bisq.core.support
No other changes in that commit.
We want to improve the data structure with the trader chat.
Support will be the top level.
Then dispute containing arbitration and mediation.
Next to dispute will be trader chat.
bisq.core.support
bisq.core.support.dispute.arbitration
bisq.core.support.dispute.mediation
bisq.core.support.traderchat (not happy with name for that yet)
* Refactor: Move dispute domain classes into isq.core.support.dispute package
* Refactor: Move classes
Move bisq.core.chat.ChatSession to bisq.core.support.ChatSession
Move bisq.core.chat.ChatManager to bisq.core.support.ChatManager
Move bisq.core.trade.TradeChatSession to bisq.core.support.traderchat.TradeChatSession
* Refactor: Move DisputeCommunicationMessage
* Refactor: Rename DisputeCommunicationMessage to ChatMessage
* Add comments
* Refactor: Move class
* Refactor: Rename class
* Refactor: Rename addDisputeCommunicationMessage and strings and variables
Rename disputeCommunicationMessage to chatMessage
* Refactor: Rename method
* Refactor: Rename methods and strings
* Add ArbitrationChatMessage and DisputeChatMessage
* Refactor: Rename class
* Move ChatMessage.Type to SupportType
Add to all supportMessages the SupportType so that we can filter in our
chatSessions the messages we are interested in.
* Refactor: Move classed to new package
* Refactor: Rename package
* Refactor: Move classed to new package
* Refactor: Move classed to new package
* Refactor: Rename classes
* Refactor: Rename package
* Refactor: Rename classes
* Refactor: Rename classes
* Remove empty DisputeModule
* Refactor: Rename classes
* Refactor SupportManager domain (WIP)
* Refactor SupportSession domain (WIP)
* Remove methods from SupportSession
* Dont expose p2pService in SupportManager
* Remove supportType in SupportSession
* Remove supportSession from getPeerNodeAddress method
* Remove isBuyer from supportSession
* Move creation of ChatMessage to SupportManager
* Remove isMediationDispute fielf in ChatMessage
* Remove chatMessage.isMediationDispute()
* Refactor: Rename trade.getCommunicationMessages()
* Move creation of ChatMessage to Chat
* Refactor: Rename class
* Refactor: Move ChatView class
* Refactor: Move PriceFeedComboBoxItem class to shared package
* Refactor: Use 'public abstract' instead of 'abstract public'
* Refactor: Use 'protected abstract' instead of 'abstract protected'
* Add traderChatManager.onAllServicesInitialized() to BisqSetup
* Remove unused param
* Refactor: Rename addChatMessage to addAndPersistChatMessage
* Fix missing check at ack msg handling
Various WIP refactorings/improvements
* Remove addAndPersistChatMessage from SupportSession
* Remove disputeManager from DisputeSession
* Fix missing getConcreteDisputeChatSession impl.
* Refactor: Rename package
* Refactor: Rename classes
Avoid trader as it might confuse with trader chat.
As for mediation/arbitration the agent (mediator/arbitrator) are acting
a bit like a server we use the client terminology for the traders.
* Refactor: Move classes to new package
* Fix missing protobuf data
- Add missing SupportType to protobuf
- Remove is_mediation_dispute from Dispute protobuf
definition
- Add getAgentNodeAddress method
- Var. other refactorings, cleanups
* Clone list at persisting to avoid ConcurrentModificationException
* Fix order of SupportType
Old clients fall back to enum at slot 0.
* Add getDisputeState_StartedByPeer template method
* Add trade protocol tasks for mediation result tx signing and msg sending
* Complete protocol tasks for mediation
* Refactor: Remove unneeded SuppressWarnings type: "WeakerAccess"
* Complete mediation result protocol
Works now all but not much tested....
* Add activation date and capability
We need to make sure that not updated users cannot cause problems once mediation is supported. We would get mixed cases where one has a mediation ticket and the not updated user an arbitration ticket. To avoid that we set an activation date with about 10 days from release. Until that date mediation is not supported.
Additionally we use OfferRestrictions.REQUIRE_UPDATE_DATE for hiding offers from users how have not updated (we use the fact that mediator and arbitrator has been same in old version, in new version they are different).
An old client cannot take an offer from a new maker as he does not has set the new MEDIATION capability. He will get an null value as AvailabilityResult as he has not the new entry MISSING_MANDATORY_CAPABILITY.
We will also use the min version for trading in the filter, so that not updated users get a popup telling them to update and they see all offers deactivated.
* Various fixes
* Remove code part which does not make sense (anymore)
Maybe in older versions there was use of openDisputes and closedDisputes
but now it does not make sense anymore and arbitrator never gets 4 cases
opened if offline.
* Add check of balance is > 0
* Only close trade if payout tx is set
* Add missing check if arbitrator and mediator are available
* Fix wrong key
* Improve handling of checks and popup display
For create and take offer we check certain conditions and show a
popup if not met. This commit moves that to GuiUtils.
* Rename any occurrance of DisputeResolver to DisputeAgent
* Fix handling of mediatorPubKeyRing
* Remove disputeSummaryWindow.evidence fields
* Add missing persistence for MediationResultState
* Fix tests
* Make text more compact to not exceed space
* Refactor NotificationGroup
* Improve text, add dev testing feature for popups
* Improve text
* Renamed a key and assigned a new text
* Fix states
* Do not set errorMessage
Do not set errorMessage if both peers have opened a dispute and agent
was not online
* Remove logs used for dev testing
* Fix getMedian method with empty list
* Add new methods and tests
Add fromCommaSeparatedOrdinals and toCommaSeparatedOrdinals to convert
from string representations (used for handling backward compatibility
with mediation release).
Add check if int >= 0 to fromIntList
* Move error log outside of delayed call
* Add capabilities entry to extraDataMap in offer
The previous implementation did not work for supporting updates and
hiding offers from not updated clients.
We use now the capabilities converted to a string list and put it into
the extraDataMap. If a use with old persisted offers updates his offers
gets converted to add the capabilities. Updated clients will ignore
offers without the mediation capability set in the offer.
* Rename non sync protobuf definitions
As Christoph Sturm pointed out we can rename protobuf entries.
Only index number must not be changed.
* Fix UI state when arbitration has started
Only set mediation state if we are not in arbitration state.
* Remove restriction
* Fix typo; remove errorMessage
If both have opened a dispute and agent was not online we dont treat it
as error.
* Improve text
* Store full address for localhost dev testing
The arbitrator/mediator selection is based on statistics of usage of
agents in past trades. We put the first 4 chars into the trade
statistics, but for localhost that would be same vale for 2 diff nodes.
* Remove errorMessage
If both have opened a dispute and agent was not online we dont treat it
as error.
* Improve text
* Keep accept or reject button enabled after accept
- If peer never accepts the trader who has accepted first can change
to reject to open a arbitration dispute.
We could improve that by adding a new state to open arbitration
directly and show a diff. button text and popup. But I think for now
thats ok as well....
* Cleanups (no functional change)
- remove unused params
- remove not used code
- reformat
- clean up comments
- fix log levels
- remove redundant annotations
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Update core/src/main/resources/i18n/displayStrings.properties
Co-Authored-By: Steve Jain <mfiver@gmail.com>
* Improve text
* Auto fill remaining amount in custom payout
If mediator or arbitrator are doing a custom payout, we auto-fill
counterpart field with remaining amount, so he does not need to
calculate.
We do not have any old versions anymore which might not support
AckMessages, so we can remove it. It might also fix issues that
AckMessages are not sent as the capabilities are not known yet.
- Remove processDelayedItems list as we do not delay anymore the data
items and protectedStoragePayloads do not get an extra treatment if
they are marked as LazyProcessedPayload.
- Add duration logging
- Replace checkArgument with an if check
- Apply code inspection
- Cleanup
- Add better logs and duration measurements for expensive operations
- Convert debug logs to trace to avoid flooding the output in debug log
mode.
- Cleanups
* this class is not a clock but it watches the clock, detects standby
and runs periodic tasks.
* there is already a jdk method called clock
First i thought it should be called PeriodicTaskManager, now i find
ClockWatcher more fitting.
When taking an offer, ack messages for
OfferAvailablilityRequest/Response were failing to be sent with the
following error.
> Jun-23 22:35:38.129 [JavaFX Application Thread] ERROR
> b.c.o.a.OfferAvailabilityProtocol: AckMessage for
> OfferAvailabilityResponse failed. AckMessage=AckMessage{
> uid='8779f9ae-22e9-4f16-bbbb-4da89fe23cdf',
> senderNodeAddress=localhost:3333,
> sourceType=OFFER_MESSAGE,
> sourceMsgClassName='OfferAvailabilityResponse',
> sourceUid='df1a50c5-c6e7-4c81-8ad4-a100d622a053',
> sourceId='pexluolj-2e5e5d9f-5aca-4a3d-b66a-60b72afe3d2c-112',
> success=true,
> errorMessage='null'
> } NetworkEnvelope{
> messageVersion=12
> }, makersNodeAddress=localhost:3632, errorMessage=We did not send the
> EncryptedMessage because the peer does not support the capability.
Instead of the 3 minutes delay we set the flag from the lite node once
the blocks are received. We delay 20 seconds to allow multiple getBlocksRequests
to finish.
As soon we are over our connection target we start disconnecting seed
nodes though that can be too early as getBlocks requests are still
pending. We delay the disconnect seed handling to 3 minutes after our
first connection so give it enough time to receive the getBlocksResponse.
When we request at startup the blocks from a seed which has not yet
received out capabilities or node address we will not get a response.
We do not want to depend on the state in the getData domain in the
p2p network by using only a seed which has already responded but we
prefer to make sure the seednode will get all the data by our request
to be able to respond.
A recent change in the netlayer is now seeing exceptions wrapped in
a TorCtlException if an error occurs while setting up Tor.
So when an issue such as "Auth cookie not created" (#2398) occurs,
which was previously raised as an IOException, it was restarting Tor
rather than showing the error message to the user.
Florian reported that they consume quite a bit of performance.As
they have not been used for development testing since long we should
better remove those.
- Add program args: msgThrottlePerSec, msgThrottlePer10Sec,
sendMsgThrottleTrigger and sendMsgThrottleSleep
- Add ConnectionConfig class with static injected field in Connection
- Cleanups
Issue: If an IOException is raised when attempting to create
tor and the hidden service, the application will just quit without
any indication to the user. One particular scenario where this occurs
is mentioned in https://github.com/bisq-network/bisq/issues/2398.
Cause: There is an explicit statement to exit the application when an
IOException is raised.
Fix: Rather than just exit the application, show an error message
and inform the user what went wrong.
In regtest we got incorrectly onNoPeersAvailable called if the first
seed node in our list was not available. It triggered a
onAllServicesInitialized and led to incorrect behaviour in case we
received data from the second seednode. One bug was that we did not
clone the remaining nodes list in the for loop which led that the list
was empty for each delayed call. The other bug was that we did not
check if there is another connection attempt open when we got a
connection fault from the not available seed.
- gives testnet and regtest a more realistic environment (most assets
would be disabled due lack of trade activity otherwise as testnet and
regtest ahs dao enabled)
We changed the earlier behaviour with delayed execution of chunks of the list as it caused
worse results as if it is processed in one go.
Main reason is probably that listeners trigger more code and if that is called early at
startup we have better chances that the user has not already navigated to a screen where the
trade statistics are used for UI rendering.
We need to take care that the update period between releases stay short as with the current
situation before 0.9 release we receive 4000 objects with a newly installed client, which
causes the application to stay stuck for quite a while at startup.
It is no longer necessary to publish Maven metadata about common, core
and other submodules as they are no longer managed as separate libraries
in separate repositories. The only way these modules should be getting
referenced is from within applications in this repository such as
desktop, statsnode, etc. Essentially, we're no longer publishing our
libraries for public consumption.
- We introduce a new basic storage type for reading from a resource file
if available and reading initial db file if available. That is required
for the snapshots of the DaoState which will be shipped with the source
code.
- We separate the support for maps to MapStoreService
- Add check for isBootstrapped before calling
processProtectedMailboxStorageEntry
- Add call of to maybeProcessAllMailboxEntries at
onUpdatedDataReceived and onTorNodeReady
- We saw that we get a NetworkNotReadyException called but it is unclear
why that can happen as that method should be only called after bootstrap
flag is set. But anyway that is not a critical issue as it only removes
the mailboxMessage and in case we are nto well connected it would get
removed by the TTL.
